Abstract
Si3N4-TiN nano-composite has been prepared by anin situ compositing method with silicon nitride powder, aluminium iso-propoxide and titanium butoxide as the raw materials. The densification mechanism during hot-pressing and the microstructure of the densified materials were characterized from the point of view of phase composition, TiN inclusion distribution and the interface properties. The dense materials were mainly composed of β′-sialons, residual α-Si3N4, silicon oxynitride, and TiN. The materials were featured by the very fine size of the precursor-derived particulate TiN which was homogeneously distributed in the matrix.
Similar content being viewed by others
References
A. Bellosi, S. Guicciardi andA. Tampieri, J. Eur. Ceram. Soc.9 (1992) 89.
K. Kish andS. Umebayashi,J. Ceram. Soc. Jpn 96 (1988) 725.
T. Mah,Bull. Am. Ceram. Soc. 60 (1981) 1229.
F. F. Lange,J. Am. Ceram. Soc. 56 (1973) 445.
Idem, ibid. 72 (1989) 3.
R. Riedil, K. Strecker andG. Petzow,ibid. 72 (1989) 2071.
D. N. Ovreboe, S. K. Biswas, F. Castro andF. L. Riley, in “4th International Symposium on Ceramic materials and Components for Engines”, edited by R. Carlsson, T. Johasson and L. Kahlman (Elsevier Applied Science, London, 1991) pp. 315–23.
C. M. Wang andF. L. Riley,J. Eur. Ceram. Soc. 10 (1992) 83.
C. P. Gazzara andD. R. Messier,Bull Am. Ceram. Soc. 56 (1977) 777.
K. Ichikawa, in “Silicon nitride-I” edited by S. Somiya, M. Mitomo and M. Yshimura (Elsevier Applied Science, London, 1990) pp. 107–16.
B. Bergman andH. Heping,J. Eur. Ceram. Soc. 6 (1990) 3.
T. Ekstrom, P. O. Kall, M. Nygren andP. O. Olsson,J. Mater. Sci. 24 (1989) 1853.
D. A. Bonnel, M. Ruhle andT. Y. Tien,J. Am. Ceram. Soc. 69 (1986) 623.
M. H. Lewis, C. J. Reed andN. D. Butler,Mater. Sci. Eng. 71 (1985) 87.
W. D. Kingery,J. Appl. Phys. 30 (1959) 301.
S. Hampshire andK. H. Jack,Proc. Br. Ceram. Soc. Spec. Ceram. 7 31 (1981) 37.
S. Hampshire, R. A. L. Drew andK. H. Jack,Phys. Chem. Glasses 26 (1985) 182.
M. Trigg,J. Am. Ceram. Soc. 63 (1980) 103.
W. Y. Li andF. L. Riley,J. Eur. Ceram. Soc. 8 (1991) 345.
A. D. Stalios, J. Luyten, C. D. Hemsley, F. L. Riley andR. J. Fordham,ibid. 7 (1991) 75.
K. H. Jack,Met. Technol. 9 (1982) 297.
M. B. Trigg andE. R. McCartney,J. Am. Ceram. Soc. 64 (1981) C153.
N. S. Jameel andD. P. Thompson, in “British Ceramic Society Proceedings, Special Ceramics 8”, edited by S. P. Howlett and D. P. Thompson, (British Ceramic Society, London, 1988) pp. 95–108.
W. K. Tredway andS. H. Risbud,J. Mater. Sci. Lett. 4 (1985) 31.
I. Sekerciogulu andR. R. Wills,J. Am. Ceram. Soc. 62 (1979) 590.
W. G. Staley andG. W. Brindley,ibid. 52 (1969) 616.
R. F. Davis andJ. A. Pask,ibid. 55 (1972) 525.
R. J. Brook, in “Treatise on materials science and technology”, Vol. 9, edited by F. F. Wang (Academic Press, New York, 1976) pp. 331–64.
P. G. Shewman,Trans. Metall. Soc. AIME 230 (1964) 1134.
F. F. Lange andM. M. Hirlinger,J. Am. Ceram. Soc. 67 (1984) 164.
L. A. Xue, K. Meyer andI. W. Chen,ibid. 75 (1992) 822.
D. J. Magley, R. A. Winholtz andK. T. Faber,J. Am. Ceram. Soc. 73 (1990) 1641.
R. W. Davidge, in “Mechanical behaviour of ceramics”, (Cambridge University Press, Cambridge, 1980) pp. 28–32.
W. Y. Li, PhD thesis, University of Leeds (1992).
P. Boch andJ. C. Glandus, in “Progress in nitrogen ceramics”, edited by F. L. Riley (Martinus Nijhoff, The Hague, 1983). pp. 589–94.
R. Raj andF. F. Lange,Acta Metall 29 (1981) 1993.
D. V. Szabo, G. H. Campbell, J. Brulely, M. J. Hoffmann andM. Ruhle,J. Am. Ceram. Soc. 75 (1992) 249.
K. H. Jack,J. Mater. Sci. 11 (1976) 1135.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wang, C.M. Microstructure development of Si3N4-TiN composite prepared byin situ compositing. J Mater Sci 30, 3222–3230 (1995). https://doi.org/10.1007/BF01209241
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01209241