Summary
A robust kinematic hardening rule is proposed which appropriately blends the deviatoric stress rate rule and the Tseng-Lee rule in order to satisfy both the experimental observations made by Phillips et al. [1]–[5] and the nesting of the yield surface to the limit surface. The work presented in Part I is confined to the theoretical formulation of kinematic hardening rule with limited correlation to experimental results. A more general expression for the plastic modulus is proposed. The expressions proposed by McDowell and by Dafalias can be obtained as a special case of the proposed expression. An additional parameter ζ is introduced that reflects the dependence of the plastic modulus on the angle between the deviatoric stress rate tensor and the direction of the limit backstress relative to the yield backstress.
Similar content being viewed by others
References
Phillips, A., Tang, J.-L., Ricciuti, M.: Some new observations on yield surfaces. Acta Mech.20, 23–39 (1974).
Phillips, A., Weng, G. J.: An analytical study of an experimentally verified hardening law. ASME J. Appl. Mech.42, 375–378 (1975).
Phillips, A., Moon, H.: An experimental investigation concerning yield surfaces and loading surfaces. Acta Mech.27, 91–102 (1977).
Phillips, A., Lee, C.-W.: Yield surfaces and loading surfaces. Experimental and recommendations. Int. J. Solids Structures15, 715–729 (1979).
Phillips, A., Das, P. K.: Yield surfaces and loading surfaces of aluminum and brass: an experimental investigation at room and elevated temperatures. Int. J. Plasticity1, 89–109 (1985).
Prager, W.: A new method of analyzing stresses and strains in work-hardening plastic solids. ASME J. Appl. Mech.78, 493–496 (1956).
Ziegler, H.: A modification of Prager's hardening rule. Q. Appl. Math.17, 55–65 (1959).
McDowell, D. L.: An evaluation of recent developments in hardening and flow rules for rate-independent, nonproportional cyclic plasticity. ASME J. Appl. Mech.54, 323–334 (1987).
Mroz, Z.: An attempt to describe the behavior of metals under cyclic loads using a more general workhardening model. Acta Mech.7, 199–212 (1969).
Chaboche, J. L.: Time independent constitutive theories for cyclic plasticity. Int. J. Plasticity2 (2), 149–188 (1986).
Tseng, N. T., Lee, G. C.: Simple plasticity model of the two-surface type. ASCE J. Engineering Mech.109 (3), 795–810 (1983).
Voyiadjis, G. Z., Kattan, P. I.: A generalized Eulerian two-surface cyclic plasticity model for finite strains. Acta Mech.81, 143–162 (1990).
Nemat-Nasser, S.: Decomposition of strain measures and their rates in finite deformation elastoplasticity. Int. J. Solids Structures15, 155–166 (1979).
Nemat-Nasser, S.: On finite plastic flow of crystalline solids and geomaterials. J. Appl. Mech.50, 1114–1126 (1983).
Lee, E. H.: Some comments on elastic-plastic analysis. Int. J. Solids Structures17, 859–872 (1981).
Asaro, R. J.: Micromechanics of crystals and polycrystals. Adv. Appl. Mech.23, 1–115 (1983).
Zbib, H. M., Aifantis, E. C.: On the concept of relative and plastic spins and its implications to large deformation theories. Part II. Anisotropic hardening plasticity. Acta Mech.75, 35–56 (1988).
Voyiadjis, G. Z., Kattan, P. I.: Eulerian constitutive model for finite deformation plasticity with anisotropic hardening. Mech. Materials7, 279–293 (1989).
Hill, R.: Mathematical theory of plasticity. Oxford: Oxford University Press 1950.
Voyiadjis, G. Z., Foroozesh, M.: Anisotropic distortional yield model. ASME, J. Appl. Mech.12, 537–547 (1990).
Lowe, T. C., Miller, K. A.: Improved constitutive equations for modeling strain softening. Part 1. Conceptual development. J. Engineering Materials Technol.106, 337–342 (1984).
Lowe, T. C., Miller, K. A.: Modeling internal stresses in the nonelastic deformation of metals. J. Engineering Materials Technol.108, 365–373 (1986).
Dafalias, Y. F.: The concept and application of the bounding surface in plasticity theory. Physical nonlinearities in structural analysis (Hult, J., Lamitre, J., eds.), pp. 56–63. IUTAM Symposium, Senlis, France. Springer 1981.
Dafalias, Y. F.: Modeling cyclic plasticity: simplicity versus sophistication. In: Mech. Engineering Materials (Desai, C. S., Gallagher, R. H., eds.), pp. 153–178. Wiley 1984.
Shiratori, E., Ikegami, K., Yoshida, F.: Analysis of stress-strain relations by use of an anisotropic hardening potential. J. Mech. Phys. Solids27, 213–229 (1979).
Voyiadjis, G. Z., Kattan, P. I.: Phenomenological evolution equations for the backstress and spin tensors. Acta Mech.88, 91–111 (1991).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Voyiadjis, G.Z., Sivakumar, S.M. A robust kinematic hardening rule for cyclic plasticity with ratchetting effects. Acta Mechanica 90, 105–123 (1991). https://doi.org/10.1007/BF01177403
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF01177403