Abstract
The wetting characteristics of unsaturated polyester resins on glass fibres with different sizings have been studied by contact angle determination periods. The styrene content of the matrix and the nature of the coatings result to be determinant in the wettability of glass fibres by the polyester matrices. Highest styrene content and styrene-soluble-coatings determine better wetting characteristics. Mechanical properties of the cured specimens and scanning electron microscopy on the fracture surfaces were also performed. Interesting correlations between the nature of the sizing agent and cohesive energy density with mechanical properties and fibre/matrix adhesion were found.[/p]
Similar content being viewed by others
References
W. D. Bascom andJ. B. Ramano,Ind. Eng. Chem. Prod. Res. Develop. 7 (1968) 172.
R. J. Good,Poly. Sci. Tech. - Adh. Sci. and Tech. 9A Lieng-Huang Lee (1975) 107.
D. W. van Krevelen andP. J. Hoftyzer, “Properties of Polymers”, (Elsevier, New York, 1976).
S. Wu, “Polymer interface and adhesion” (Marcel Dekker Inc., New York and Basel, 1982).
K. Wolf, R. E. Fornes, J. D. Memory andR. D. Gilbert,Chem. Phys. Carbon 18 (1982) 93.
J. I. Yamaki andY. Katayama,J. Appl. Polym. Sci. 19 (1975) 2897.
R. Burns, “Polyester Molding Compounds”, (Marcel Dekker Inc, New York and Basel, 1982).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sellitti, C., Vargui, S., Martuscelli, E. et al. Wettability of glass fibres with different sizings and their adhesion to unsaturated polyester matrices. J Mater Sci 22, 3477–3484 (1987). https://doi.org/10.1007/BF01161445
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01161445