Abstract
A flashlamp-pumped Ti:Sapphire laser is tested with rods of various Figures of Merit (FOM from 100 to 800) and Ti3+ concentrations (0.1 and 0.15% by weight) and we measured the laser energy dependence as a function of these parameters. Output energies above 2 J are obtained without dye converter, leading to a 1.8% overall efficiency and a 2.2% slope efficiency. The effects of pump pulse duration by variation of the discharge capacitance are also monitored.
Similar content being viewed by others
References
K.F. Wall, A. Sanchez: Lincoln Lab. J.3, 447 (1990)
G.T. Maker, A.I. Ferguson: Opt. Lett.15, 375 (1990)
E.G. Erickson: InProc. on Tunable Solid State Lasers, ed. by M.L. Shand, H.P. Jenssen, Vol. 5 (Optical Society of America, Washington, DC 1989) p. 26
A.J. Brown, C.H. Fischer, D.D. Lowenthal, K.W. Kangas, C.H. Muller: CLEO Technical Digest, Vol. 7 (1990) p. 258
A. Hoffstädt: Laser und Optoelektronik,24, 65 (1992)
J. Said, J.P. Boquillon: Opt. Commun.82, 51 (1991)
J.P. Boquillon, J. Said: Appl. Phys. A54, 384 (1992)
Elight Laser Systems, Berlin, Technical Bulletin 09 (1992)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Boquillon, J.P., Musset, O. Flashlamp-pumped Ti:Sapphire laser: Influence of the rod figure of merit and Ti3+ concentration. Appl. Phys. B 59, 357–360 (1994). https://doi.org/10.1007/BF01081405
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF01081405