Abstract
An algorithm for calculating the vapor-liquid state of the polycaproamide (PCA)-low-molecular-weight compound (LMC)-H2O system was developed based on published data, and it can be used to optimize the technology for synthesis of PCA with defined properties. The validity of the algorithm was tested experimentally on a pilot installation with an output of 2–3 tons/day.
Similar content being viewed by others
References
G. Giori and B. T. Hayes, J. Polym. A-l, Polym. Chem.,8, No. 2, 351–358 (1970).
K. Riggert, in: Polyamide-6. International Symposium on Chemical Fibres [in Russian], Preprints. Vol. 2, Kalinin (1974), pp. 151–165.
Kaori Furukawa, Katsuo Take, et al., Kobunshi Rombunshu,35, No. 5, 299–306 (1978).
L. N. Mizerovskii, Theoretical Principles of Modern Technology for Fibre-Forming Polycaproamide, Doctoral Dissertation. Kazan' (1983).
A. Clement, S. Hoffrichter, and K. Körner, Faserf. Textilt.,28, No. 10, 548–549 (1977).
K. E. Fishman and N. A. Khruzin, Production of Capron Fibres [in Russian]. Khimiya, Moscow (1976).
A. S. Chegol' and N. M. Kvash (eds.), Analytical Control of Synthetic Fibre Production Khimiya, Moscow (1982), p. 71.
Additional information
All-Russian Scientific-Research Institute of Synthetic Fibres. Tver'. Translated from Khimicheskie Volokna, No. 2, pp. 23–24, March–April, 1996.
Rights and permissions
About this article
Cite this article
Vlasov, I.M., Yagofarov, S.M. & Lednik, V.F. Effect of vapor phase pressure in synthesis of polyamide-6 on its indexes. Fibre Chem 28, 76–77 (1996). https://doi.org/10.1007/BF01058278
Issue Date:
DOI: https://doi.org/10.1007/BF01058278