Abstract
A method of calibrating scanning electron microscopes by means of rectangularly shaped pitch structures is proposed. By means of these types of pitch structures it is possible to determine the increase in the microscope image, the shift in the maximum video signal relative to the coordinates of the wall of the structure, and the diameter of the electron microprobe. Information about these quantities yields a tenfold increase in the measurement precision obtained for the linear dimensions of submicron elements when using a scanning electron microscope.
Similar content being viewed by others
References
Y. Nakayama, S. Okazaki, and A. Sugimoto, J. Vac. Sci. Technol.,B6, 1930 (1988).
V. V. Severin, B. V. Deshin, L. M. Morozova, and V. P. Gurina, Izv. Akad. Nauk SSSR. Ser. Fiz.,55, 1591 (1991).
M. T. Postek. Scanning Microscopy,3, No. 4, 1087 (1989).
M. T. Postek, W. J. Keery, and R. D. Larrabee, Scanning,10, 10 (1988).
Yu. A. Novikov et al., Elektron. Prom., No. 8, 73 (1993).
Yu. A. Novikov, A. V. Rakov, and I. Yu. Stekolin, Izv. Akad. Nauk SSSR. Ser. Fiz.,57, No. 8, 79 (1993).
Yu. A. Novikov et al., Izmer. Tekh., No. 8, 62 (1993).
Yu. A. Novikov et al., Izmer. Tekh., No. 12, 24 (1993).
Additional information
Translated from Izmeritel'naya Tekhnika, No. 2, pp. 64–66, February, 1995.
Rights and permissions
About this article
Cite this article
Novikov, Y.A., Rakov, A.V. & Stekolin, I.Y. Calibration of scanning electron microscopes by means of pitch structures. Meas Tech 38, 242–245 (1995). https://doi.org/10.1007/BF00979646
Issue Date:
DOI: https://doi.org/10.1007/BF00979646