Summary
The main advantages of the new method of measurement include the following.
-
1.
Approximation of the conditions of measurement to the conditions of operation of a conoid and follower in a real conoid mechanism, since the gauge moves arbitrarily over the working surface and may be found at any surface point not given by the coordinates of the working table.
-
2.
Great efficiency of measurement, 10–15 times better than measurement by points.
-
3.
Possibility of preparing interchangeable conoids.
-
4.
High precision of measurement due to exclusion of the errors of the machine, instrument, preparation and setting of the copy, and also the exclusion of mandrel eccentricity.
-
5.
It does not require precise and expensive machines and instruments with optical reading devices.
-
6.
Possibility of measuring eccentrics, screws with nonuniform pitch, and other complex components.
Similar content being viewed by others
Rights and permissions
About this article
Cite this article
Rumiantsev, A.V. Measurement of working surface of conoids by comparison with specimen. Meas Tech 1, 7–10 (1958). https://doi.org/10.1007/BF00976589
Issue Date:
DOI: https://doi.org/10.1007/BF00976589