Advertisement

Dependence of the yield stresses of certain materials on loading rate

  • Yu. A. Belyaev
  • A. F. Mel'shanov
  • Yu. V. Suvorova
Article
  • 24 Downloads

Abstract

The dependence of the dynamic yield stresses of certain metals and alloys on loading rate has been investigated at temperatures of +20 and −196°C. In the experiments the loading rate remained constant up to the appearance of plastic strains, i.e.,\(\sigma (t) = \mathop \sigma \limits^ \bullet t\), where\(\mathop \sigma \limits^ \bullet = {\text{const}}\). The yield stresses of the materials and the time to the appearance of plastic strains were determined from the oscillograms representing the strain and load as functions of time.

Keywords

Mathematical Modeling Mechanical Engineer Plastic Strain Industrial Mathematic Dynamic Yield 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Yu. Ya. Voloshenko-Klimovitskii, The Dynamic Yield Point [in Russian], Nauka, Moscow, 1965.Google Scholar
  2. 2.
    Yu. Ya. Voloshenko-Klimovitskii, Yu. A. Belyaev, and A. F. Mel'shanov, “Equipment for testing materials at high loading rates,” Zav. lab., vol. 33, no. 8, pp. 1016–1019, 1967.Google Scholar
  3. 3.
    G. S. Shapiro, “Longitudinal vibrations of rods,” PMM, vol. 10, no. 5, pp. 597–616, 1946.Google Scholar
  4. 4.
    J. D. Campbell, “Dynamic yielding of mild steel,” Acta Metallurgica, vol. 1, no. 6, pp. 706–710, 1953.Google Scholar
  5. 5.
    Yu. V. Suvorova, “Delayed yielding of steels (review of experimental results),” PMTF [Journal of Applied Mechanics and Technical Physics], no. 3, 1968.Google Scholar
  6. 6.
    J. M. Krafft, “Effect of temperature on delayed yielding of mild steel for short loading duration,” Trans. Amer. Soc. Metals, vol. 48, pp. 249–261, 1956.Google Scholar
  7. 7.
    F. V. Warnock and D. B. C. Taylor, “Yield phenomena of a medium carbon steel under dynamic loading,” Proc. Instn. Mech. Engrs, vol. 161, p. 165, 1949.Google Scholar
  8. 8.
    C. F. Elam, “The influence of rate of deformation on the tensile test with special reference to the yield point in iron and steel,” Proc. Roy. Soc., London, vol. 165, pp. 568–592, 1938.Google Scholar
  9. 9.
    J. M. Krafft and A. M. Sullivan, “Effect of grain size and carbon content on the yield delay time of mild steel,” Trans. Amer. Soc. Metals, vol. 51, pp. 643–665, 1959.Google Scholar
  10. 10.
    D. S. Wood and D. S. Clark, “The influence of temperature upon the time delay for yielding in annealed mild steels,” Trans. Amer. Soc. Metals, vol. 43, pp. 571–586, 1951.Google Scholar

Copyright information

© Consultants Bureau 1972

Authors and Affiliations

  • Yu. A. Belyaev
    • 1
  • A. F. Mel'shanov
    • 1
  • Yu. V. Suvorova
    • 1
  1. 1.Moscow

Personalised recommendations