Abstract
A model of polymer melting in an extruder, based on the solution of the twodimensional nonstationary conservation equations, is proposed.
Similar content being viewed by others
Literature cited
V. I. Boyarchenko, “Macrokinetic theory of extrusion of polymers and polymerizing materials,” Author's Abstract of Doctoral Dissertation, Physicomechanical Sciences, Chernogolovka (1982).
W. P. Perwadtschuk (V. P. Pervadchuk) and W. I. Jankow (V. I. Yankov), “Zweidimensionale Strömung nicht-Newtonscher Medien in der KanÄlen von Schneckmaschinen,” Plaste Kautschuk,28, No. l, 36–44 (1982).
A. Z. Halmos, J. R. A. Pearson, and R. Trottnow, “Melting in single-screw extruders,” Polymer,19, 1199–1216 (1979).
E. M. Mount and C. I. Chung, “Melting behavior of solid polymers on a metal surface at processing conditions,” Polym. Eng. Sci.,18, No. 9, 711–720 (1978).
H. Fukase, T. Kunio, S. Shinia, and A. A. Nomura, “A plasticating model for single-screw extruders,” Polym. Eng. Sci.,22, No. 9, 578–586 (1982).
B. H. Maddock, “A visual analysis of flow and mixing in extruder screws,” SPE J.,15, No. 5, 383–389 (1959).
Z. Tadmor, H. J. Divdevani, and I. Klein, “Melting in plasticating extruders. Theory and experiments,” Polym. Eng. Sci.,7, No. 3, 198–217 (1967).
Z. Tadmor and I. Klein, Principles of Plasticating Extrusion, Van Nostrand Reinhold Co., New York (1970).
D. J. Marshall, I. Klein, and R. H. Uhl, “Measurement of screw and plastic temperature profiles in extruders,” SPE J.,20, No. 4, 329–334 (1964).
P. J. Roache, Computational Fluid Dynamics, Hermosa (1976).
A. A. Samarskii, Theory of Difference Schemes [in Russian], Nauka, Moscow (1977).
T. V. Kuskova, “Difference methods of calculating viscous incompressible liquid flow,” in: Computational Methods and Programming [in Russian], Moscow State Univ. (1967), No. VII, pp. 16–27.
N. N. Malinin, Applied Theory of Plasticity and Creep [in Russian], Mashinostroenie, Moscow (1975).
Author information
Authors and Affiliations
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 48, No. 1, pp. 75–80, January, 1985.
Rights and permissions
About this article
Cite this article
Pervadchuk, V.P., Trufanova, N.M. & Yankov, V.I. Mathematical model and numerical analysis of heat-transfer processes associated with the melting of polymers in plasticating extruders. Journal of Engineering Physics 48, 60–64 (1985). https://doi.org/10.1007/BF00878258
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00878258