The smoothing capability of extrusion equipment was evaluated using the accumulated shear strain. The effects of the polymer rheological properties and its processing conditions on the amount of accumulated strain were analyzed using a regression equation obtained from a numerical model of heat- and mass-transfer processes in the extruder channel.
Similar content being viewed by others
References
B. K. Chostkovskii, Vestn. Samar. Gos. Tekh. Univ., Ser. Tekh. Nauki, No. 37, 70-73 (2005).
R. V. Antipin and T. B. Chistyakova, Avtom. Prom-st., No. 5, 17-20 (2008).
Z. Tadmor and K. Gogos, Theoretical Principles of Polymer Processing [in Russian], Khimiya, Moscow, 1984, 504 pp.
V. I. Yankov, V. P. Pervadchuk, and V. I. Boyarchenko, Processing of Fiber-forming Polymers (Calculation Methods) [in Russian], Khimiya, Moscow, 1989, 320 pp.
A. S. Klinkov, M. V. Sokolov, et al., Vestn. Tambov. Gos. Tekh. Univ., 14, No. 4, 870-881 (2008).
N. M. Trufanova and A. G. Shcherbinin, World Appl. Sci. J., 27, No. 11, 1401-1412 (2013).
S. Syrjala, Num. Heat Trans., Part A, 37, 897-915 (2000).
C. Rauwendaal, Plast., Rubber Compos., 33, No. 9/10, 390-396 (2004).
M. K. Das and P. S. A. Ghoshdastidar, in: Proceedings of the 6th AIAA/ASME Joint Thermophysics and Heat Transfer Conference, 1994, Vol. 275, pp. 123-123.
E. V. Subbotin, A. G. Shcherbinin, and N. M. Trufanova, Izv. Tomsk. Politekh. Univ., 320, No. 4, 171-177 (2012).
E. V. Subbotin, N. M. Trufanova, and A. G. Shcherbinin, Kabeli Provoda, 330, No. 5, 18-22 (2011).
A. G. Shcherbinin and V. G. Savchenko, Intellekt. Sist. Proizvod., 15, No. 1, 198-205 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskie Volokna, No. 1, pp. 14-17, January—February, 2016.
Rights and permissions
About this article
Cite this article
Terlych, A.E., Shcherbinin, A.G. Analysis of the Mixing Process in an Electrically Insulated Plasticizing Extruder. Fibre Chem 48, 12–15 (2016). https://doi.org/10.1007/s10692-016-9730-5
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-016-9730-5