Abstract
The article presents experimental data on the deformation and strength characteristics of a number of materials reinforced with three-dimensionally woven multilayer glass fabric, which are compared with the corresponding data for traditional glass-reinforced plastics. The accuracy of the formulas proposed [1] is evaluated. The effect of prestressing the warp and weft fibers on the mechanical properties of the material was investigated. The effectiveness of simultaneous prestressing of the warp and weft was evaluated; the magnitude of the optimal force was established.
Similar content being viewed by others
Literature cited
A. V. Roze and I. G. Zhigun, Mekhan. Polim., No. 2, 311 (1970).
Yu. R. Vitenberg and N. S. Pliss, in: Transactions of the All-Union Scientific-Research Institute of Abrasives and Grinding [in Russian], No. 8, Moscow-Leningrad (1968), p. 113.
V. V. Bolotin, Reports of the Research Works of the Moscow Power Institute During 1964–1965; Power Machine Construction Section; Dynamics and Strength Subsection [in Russian], Moscow (1965), p. 43.
I. G. Zhigun, Mekhan. Polim., No. 5, 859 (1968).
Yu. M. Tarnopol'skii and A. M. Skudra, Structural Strength and Deformation Properties of Glass-Reinforced Plastics [in Russian], Riga (1966).
R. P. Shlitsa, Mekhan. Polim., No. 2, 307 (1966).
Yu. M. Tarnopol'skii and A. V. Roze, Characteristics of Calculating Reinforced Plastic Parts [in Russian], Riga (1969).
S. Tsai and G. Springer, Engineering Design and Technology (USA), Ser. B, No. 3, 168 (1965).
S. Tsai, Applied Mechanics (USA), Ser. E., No. 3, 58 (1963).
S. A. Ambartsumyan and A. A. Khachatryan, Inzh. Zh. MTT, No. 2, 44 (1966).
E. K. Ashkenazi, Anisotropy of Engineering Materials [in Russian], Leningrad (1969).
Additional information
See [1] for report 1.
Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 3, pp. 471–476, May–June, 1970.
Rights and permissions
About this article
Cite this article
Roze, A.V., Zhigun, I.G. & Dushin, M.I. Three-dimensionally reinforced woven materials. Polymer Mechanics 6, 404–409 (1970). https://doi.org/10.1007/BF00858202
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00858202