Abstract
The possibility of improving the resistance to internal pressure of thick-walled rings with circumferential reinforcement by introducing radial or axial reinforcement has been investigated in the first approximation. Axial reinforcement is considered in relation to the use of combined (unidirectional + fabric) materials. On the basis of hypotheses concerning the homogeneity and linear-elastic behavior of the material and simple fracture criteria numerical estimates are obtained for the relative efficiency of the reinforcement scheme, the optimal material structure, and the corresponding ranges of relative thickness of the rings. The qualitative conclusions are compared with experiments on rings of combined material.
Similar content being viewed by others
Literature cited
G. G. Portnov and R. V. Zargaryan, Mekhan. Polim., No. 6, 1130 (1971).
Yu. M. Tarnopol'skii, G. G. Portnov, Yu. B. Spridzans, and V. N. Bulmanis, Mekhan. Polim., No. 4, 673 (1973).
G. G. Portnov and V. N. Bulmanis, Mekhan. Polim., No. 6, 1087 (1972).
Yu. M. Tarnopol'skii and A. V. Roze, Design of Reinforced-Plastic Parts [in Russian], Riga (1969).
C. B. Norris, Strength of Orthotropic Materials Subjected to Combined Stress, Rep. 1816, 3rd ed., U. S. Forest Products Laboratory, Madison, Wisconsin (1962).
S. G. Lekhnitskii, Anisotropic Plates [in Russian], Moscow-Leningrad (1957).
G. V. Bilida, Dokl. Akad. Nauk USSR, No. 6, 1280 (1966).
G. V. Bilida, Dokl. Akad. Nauk USSR,A, No. 5, 436 (1970).
V. G. Dedyukhin and V. N. Stavrov, Molding Technology and Strength of Glass-Reinforced Plastic Articles [in Russian], Moscow (1968).
V. V. Meshcheryakov, A. K. Sborovskii, and A. Ya. Gol'dman, Elastic and Strength Characteristics of Oriented Glass-Reinforced Plastics [in Russian], Leningrad (1970).
V. A. Goryushkin and Ya. D. Avrasin, in: Physical Chemistry and Mechanics of Oriented Glass-Reinforced Plastics [in Russian], Moscow (1967), p. 253.
V. V. Khitrov, "Effect of arrangement of reinforcement in the reinforcing plane on the carrying capacity of compressed sheets of fibrous composites," Candidate's Dissertation, Riga (1972).
Additional information
Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 5, pp. 802–809, September–October, 1974.
Rights and permissions
About this article
Cite this article
Khitrov, V.V., Zhmud, N.P. Radial reinforcement of thick-walled rings of composite materials. Polymer Mechanics 10, 695–701 (1974). https://doi.org/10.1007/BF00857951
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00857951