Abstract
A new method of determining the temperature dependence of the adhesion of polymers to metals and an equipment for carrying this out are described. The adhesion of the polymer to metal is determined by stripping the film from a metal plate or bar with a temperature gradient in the plane of adhesive contact in the direction in which the film is stripped.
Literature cited
B. V. Deryagin, N. A. Krotova, and V. P. Smilga, The Adhesion of Solids [in Russian], Moscow (1973).
S. S. Voyutskii, Autohesion and Adhesion of High Polymers [in Russian], Moscow (1960).
A. A. Berlin and V. E. Basin, Principles of Polymer Adhesion [in Russian], 2nd ed., Moscow, (1974).
V. A. Belyi, N. I. Egorenkov, and Yu. M. Pleskachevskii, Adhesion of Polymers to Metals [in Russian], Moscow (1971).
J. Gordon, Peel Adhesion, J. Appl. Polym. Sci.,7, No. 2, 625–665 (1964).
K. N. Obryadchikova and V. V. Kovriga, “Temperature changes of a polyethyleneterephthalate film during tearing studied by the hot-strength technique”, Vysokomolek. Soed.,15, No. 5, 988–994 (1973).
N. I. Egorenkov and E. L. Snezhkov, “A specimen for the evaluation of the adhesion between coating and backing”, Russian Patent No. 461332, Otk. Izobr. Prom. Obraztsy Tov. Zn., No. 7, 105 (1975).
N. I. Egorenkov, I. Nasyrov, and V. A. Belyi, “Effect of fillers on the adhesion of Nylon-6 coatings”, Dokl. Akad. Nauk BelorusSSR, No.12, 1085–1088 (1971).
Additional information
Institute of the Mechanics of Metal-Polymer Systems, Academy of Sciences of the Belorussian SSR, Gomel'. Translated from Mekhanika Polimerov, No. 6, pp. 1104–1105, November–December, 1975.
Rights and permissions
About this article
Cite this article
Egorenkov, N.I. Rapid method of determining temperature dependence of adhesion of polymers to metals. Polymer Mechanics 11, 945–947 (1975). https://doi.org/10.1007/BF00857623
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00857623