Abstract
The authors study the influence of an inorganic filler (aluminum oxide) on the hardness of Pentaplast and its adhesion to steel. They show that the change in adhesion accompanying filling is due to changes in the cohesive properties of Pentaplast.
Literature cited
L. S. Golubova, L. L. Mironovich, and O. R. Yurkevich, “Optimization of the thermal regime of the process of formation of pentone coatings”, in: Intensification of Technological Processes of Deposition of Polymer and Nonmetallic Coatings [in Russian], Moscow (1971), pp. 88–93.
N. I. Egorenkov, D. G. Lin, and E. N. Sokolov, “Pentaplast Coatings”, Promyshlennost' Belorussii, No. 12, 69 (1971).
V. A. Belyi, N. I. Egorenkov, and Yu. M. Pleskachevskii, Adhesion of Polymers to Metals [in Russian], Minsk (1971), p. 288.
N. I. Egorenkov, D. G. Lin, and V. A. Belyi, “Investigation of the relation between adhesion to metals and oxidation in polyethylene”, Dokl. Akad. Nauk SSSR,210, No. 5, 1148–1151 (1973).
Brief Chemical Encyclopedia [in Russian], Vol. 5 (1967), pp. 685–697.
S. S. Voyutskii, Autohesion and Adhesion of High Polymers [in Russian], Moscow (1960), p. 244.
M. M. Kalnins, E. O. Metnietse, and V. P. Karlivan, “On the temperature-time dependence of the process of formation of an adhesive bond in the system filled polyethylene-steel”, Vysokomolek. Soed., Ser. A,13, No. 1, 38–43 (1971).
N. I. Egorenkov and V. A. Belyi, “Correlation of adhesive and cohesive properties of polymers due to their structures”, Dokl. Akad. Nauk BelorusSSR,15, No. 9, 790–792 (1971).
B. V. Deryagin, N. A. Krotova, and V. P. Smilga, Adhesion of Solids [in Russian], Moscow (1973), p. 280.
A. A. Berlin and V. E. Basin, Principles of Adhesion of Polymers [in Russian], Moscow (1969), p. 320.
J. J. Bikerman, The Science of Adhesive Joints, New York (1968), p. 349.
N. I. Egorenkov, I. Nasyrov, and V. A. Belyi, “On the mechanism of action of a filler on the adhesion of polycaproamide coatings”, Dokl. Akad. Nauk BelorusSSR,12, No. 12, 1085–1088 (1971).
V. A. Belyi and N. I. Egorenkov, “Estimation of the adhesion of a polymer film to metal by the method of direct pull”, Lakokrasoch. Mater. Ikh Primen., No. 6, 49–51 (1969).
M. I. Stepnov, Statistical Processing of the Results of Mechanical Tests [in Russian], Moscow (1972). p. 232.
Additional information
Institute of Mechanics of Metal-Polymer Systems, Academy of Sciences of the Belorussian SSR, Gomel'. Translated from Mekhanika Polimerov, No. 6, pp. 1098–1101, November–December, 1975.
Rights and permissions
About this article
Cite this article
Egorenkov, N.I., Sokolov, E.N. & Rudinskii, I.K. Adhesive and cohesive properties of filled Pentaplast. Polymer Mechanics 11, 940–942 (1975). https://doi.org/10.1007/BF00857621
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00857621