Abstract
A technique for calculating the residual stresses in wound components made out of mixed carbon-fiber-and glass-fiber-reinforced plastics and the results of the calculations are presented. The effect of the conditions under which the components are wound on the magnitude and nature of the residual stresses distribution in components made out of combined composites is investigated. The results of the calculations are compared with the experimental values.
Similar content being viewed by others
Literature cited
V. V. Bolotin, “The mechanics of composite materials and constructions made out of them”, in: Structural Mechanics, the Current State and Development Perspectives [in Russian], Moscow (1972), pp. 65–98.
Yu. M. Tarnopol'skii, “Contemporary trends in the development of fiber composites”, Mekh. Polim., No. 3, 541–552 (1972).
Yu. M. Tarnopol'skii, G. G. Portnov, Yu. B. Spridzans, and V. N. Bulmanis, “Load-bearing capability of rings formed by the winding of composites reinforced by high-modulus anisotropic fibers”, Mekh. Polim., No. 4, 673–683 (1973).
V. P. Nikolaev, “On the determination of the shear modulus of glass-fiber-reinforced plastics using annular samples”, Mekh. Polim., No. 6, 1101–1103 (1971).
V. P. Nikolaev, “Concerning the testing of wound components with respect to their tensile strength in a transverse direction”, Mekh. Polim., No. 4, 759–761 (1973).
V. L. Blagonadezhin, G. V. Mishenkov, and V. P. Nikolaev, “Results of an experimental investigation of the residual stresses in wound components made out of a glass-fiber-reinforced plastic”, Mekh. Polim., No. 6, 1116–1119 (1970).
V. V. Bolotin and K. S. Bolotina, “The thermoelastic problem in the case of a circular cylinder made out of a reinforced layered material”, Mekh. Polim., No. 1, 136–141 (1967).
V. V. Bolotin and K. S. Bolotina, “The calculation of the residual stresses and deformations in components wound from reinforced plastics”, Mekh. Polim., No. 1, 134–139 (1969).
Yu. M. Tarnopol'skii and G. G. Portnov, “A change in the tension during the winding of components made out of glass-fiber-reinforced plastics”, Mekh. Polim., No. 2, 278–284 (1966).
V. P. Nikolaev and V. M. Indenbaum, “On the calculation of the residual stresses in wound components made out of glass-fiber-reinforced plastics”, Mekh. Polim., No. 6, 1026–1030 (1970).
S. G. Lekhnitskii, Anisotropic Disks [in Russian], Moscow (1957).
V. L. Blagonadezhin, V. M. Indenbaum, and V. G. Perevozchikov, Tr. Moskovsk. Energ. Inst. Dinamika Prochnost' Mashin, No. 164, 68–74 (1973).
V. L. Blagonadezhin, G. V. Mishenkov, and V. G. Perevozchikov, Tr. Moskovsk. Energ. Inst. Dinamika Prochnost' Mashin, No. 74, 133–138 (1970).
Additional information
Translated from Mekhanika Polimerov, No. 6, pp. 996–1004, November–December, 1975.
Rights and permissions
About this article
Cite this article
Blagonadezhin, V.L., Perevozchikov, V.G., Merkulov, V.D. et al. Mechanical properties of a carbon-fiber-reinforced plastic and the residual stresses in wound components made out of combined composites. Polymer Mechanics 11, 851–858 (1975). https://doi.org/10.1007/BF00857605
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00857605