Literature cited
N. Minagava and J. L. White, "The influence of titanium dioxide on the rheological and extensional properties of polymer melts," J. Appl. Polym. Sci.,20, No. 2, 501–523 (1976).
M. Takano and H. Kambe, "The viscoelastic properties of concentrated dispersions in molten polymers," Bull. Chem. Soc. (Japan),37, No. 1, 89–102 (1964).
G. V. Vinogradov, A. Ya. Malkin, E. P. Plotnikova, O. Yu. Sabsai, and N. E. Nikolaeva, "Rheological properties of carbon-black-filled polymers," in: Problems of Heat and Mass Transfer [in Russian], Moscow (1970), pp. 222–241.
I. Pliskin and N. Tokita, "Bound rubber in elastomers. Analysis of elastomer — filler interaction and its effect on viscosity and modulus of composite systems," J. Appl. Polym. Sci.,16, No. 2, 473–492 (1972).
J. S. Chong, E. B. Christiansen, and A. D. Baer, "Rheology of concentrated suspensions," J. Appl. Polym. Sci.,16, No. 2, 473–492 (1972).
T. Matsumoto, C. Hitomi, and S. Onogi, "Rheological properties of disperse systems of spherical particles in polystyrene solution at long time-scales," Trans. Soc. Rheol.,19, No. 4, 541–555 (1975).
L. A. Faitel'son and A. I. Alekseenko, "Effect of filler on the viscosity and viscoelasticity of low-density-polyethylene melts. 1." Mekh. Polim., No. 3, 478–486 (1976).
M. G. Tsiprin and L. A. Faitel'son, "Flow features of a low-density-polyethylene melt filled with potassium metasilicate," Mekh. Polim., No. 4, 693–697 (1969).
L. A. Faitel'son and É. É. Yakobson, "Rheology of filled polymers. Established shear flow and periodic deformation. 1. Relaxation time spectra. Viscosity," Mekh. Polim., No. 6, 1075–1083 (1977).
D. J. Highgate and R. W. Whorlow, "Rheological properties of suspensions of spheres in non-Newtonian media," Rheol. Acta,9, No. 4, 569–576 (1970).
J. S. Mewis and R. Bleyser, "Concentration effects in viscoelastic dispersions," Rheol. Acta,14, No. 8, 721–728 (1975).
R. E. Smelkov, "Investigation of the Weissenberg effect in polyethylenes in the fusion zone and with fillers," Zh. Prikl. Khim.,37, No. 6, 1310–1318 (1964).
J. L. S. Wales and W. Philippoff, "The anisotropy of simple shearing flow," Rheol. Acta,12, No. 1, 25–34 (1973).
K. Sakamoto and R. S. Porter, "Comparison of normal stress measurements on polymer melts," J. Polym. Sci.,8, No. 3, 177–181 (1970).
J. L. den Otter, "Rheological measurements on two uncrosslinked unfilled synthetic rubbers," Rheol. Acta,14, No. 4, 329–336 (1975).
L. A. Faitel'son and A. I. Alekseenko, "Effect of filler on the viscosity and viscoelasticity of low-density-polyethylene melts. 2." Mekh. Polim., No. 1, 122–126 (1977).
G. M. Bartenev and N. V. Zakharenko, "Viscosity and flow mechanism of mixtures of polymers with fillers," Kolloidn. Zh.,24, No. 2, 121–127 (1962).
P. P. A. Smit, "The effect of filler size and geometry on the flow of carbon-black-filled rubber," Rheol. Acta,8, No. 2, 272–282 (1969).
G. M. Bartenev and L. A. Vishnitskaya, "Rheological properties of polyisobutylene" Vysokomolek. Soed.,6, No. 4, 751–757 (1964).
V. K. Komlev and M. A. Braginskii, "Rheological properties of filled high-density (medium pressure) polyethylene," Plast. Massy, No. 3, 30–32 (1971).
L. A. Faitel'son and A. I. Alekseenko, "Effect of filler on first normal stress difference in a low-density-polyethylene melt at stationary shear flow," Mekh. Polim., No. 3, 558–559 (1970).
C. D. Han and K. U. Kim, "Rheological properties of molten polymers. 1. Homopolymer systems," J. Appl. Polym. Sci.,15, No. 5, 1149–1162 (1971).
N. Nishida, D. G. Salladay, and J. L. White, "Molecular weight distribution and rheological properties of polyisobutylene solutions," J. Appl. Polym. Sic.,15, No. 5, 1181 (1971).
G. V. Vinogradov, A. Ya. Malkin, and V. F. Shumskii, "Rheological properties of butyl rubbers and low-molecular-weight polyisobutylene," in: Progress in Rheology [in Russian], Moscow (1970), pp. 206–228.
G. V. Vinogradov, A. Ya. Malkin, and G. V. Berezhnaya, "Experimental investigation of the rheological properties of concentrated polymer solutions," Vysokomolek. Soed.,13, No. 12, 2793–2799 (1971).
R. V. Torner, Basic Processes in Polymer Processing [in Russian], Moscow (1972).
G. V. Vinogradov, A. Ya. Malkin, Yu. G. Yanovskii, E. K. Borisenkova, B. V. Yarlykov, G. V. Berezhnaya, V. P. Shatalov, V. G. Shalganova, and V. P. Yudin, "Viscoelastic properties and flow of polybutadienes and polyisoprenes," Vysokomolek. Soed., Ser. A.,14, No. 11, 2425–2442 (1972).
V. I. Brizitskii (Brizitsky), G. V. Vinogradov, A. I. Isaev, and Yu. Yu. Podol'skii (Podolsky), "Polarization-optical investigation of normal and shear stresses in flow of polymers," J. Appl. Polym. Sci.,20, No. 1, 25–40 (1976).
C. D. Han, K. U. Kim, N. Siskovic, and C. R. Huang, "An appraisal of rheological models as applied to polymer melt flow," Rheol. Acta,14, No. 6, 533–549 (1975).
G. V. Vinogradov, A. Ya. Malkin, E. P. Plotnikova, O. Yu. Sabsai, and N. E. Nikolaeva (Nikolayeva), "Viscoelastic properties of filled polymers," Intern. J. Polym. Mater.,2, No. 1, 1–27 (1972).
V. K. van der West and P. P. A. Smit, "Elastic behavior of rubber mixtures," in: Transations of International Conference on Gum and Rubber [in Russian], Moscow (1971), pp. 351–356.
G. V. Vinogradov, A. I. Isaev, V. I. Brizitskii, Yu. Ya. Podol'skii, A. Ya. Malkin, and M. P. Zabugina, "Extrudate swelling, normal stresses, and highly elastic deformations in polymer flow," Mekh. Polim., No. 1, 116–121 (1977).
A. Ya. Malkin, V. V. Goncharenko, and V. V. Malinovskii, "The polymer jet swelling effect in outflow from cylindrical and slotted channels," Mekh. Polim., No. 3, 487–492 (1976).
L. A. Faitel'son and I. P. Briedis, "Critical regimes of polymer melt deformation in rotational rheometers with a cone-plane working unit," Mekh. Polim., No. 4, 718–723 (1976).
W. V. Chang, R. Bloch, and N. W. Tschoegl, "Study of the viscoelastic behavior of uncrosslinked (gum) rubbers in moderately large deformations," J. Polym. Sci.,15, No. 4, 923–944 (1977).
G. M. Bartenev and T. N. Khazanovich, "The law of highly elastic deformations of lattice polymers," Vysokomolek. Soed.,2, No. 1, 20–28 (1960).
D. M. Himmelblau, Applied Nonlinear Programming, McGraw-Hill (1972).
Additional information
For communication 2, see [16].
Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 332–336, March–April, 1978.
Rights and permissions
About this article
Cite this article
Faitel'son, L.A., Alekseenko, A.I. Effect of filling on the viscosity and viscoelasticity of low-density polyethylene melts. 3. Polymer Mechanics 14, 269–273 (1978). https://doi.org/10.1007/BF00857474
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00857474