Conclusions
1. An approximate method for calculating the characteristics of vibration-damping polymeric coatings of complex construction, based on equations of the theory of multilayer plates and shells, has been developed.
2. The dimensionless parameters of the theory of multilayer plates and shells, g and h/r, are the basic quantities which determine the effectiveness of a damping coating.
3. An increase in number of layers in the coating, while preserving the overall thickness of the packet and an assigned ratio between the thicknesses of the polymeric and rigid layers, exerts only a small effect on the effectiveness of the coating.
Similar content being viewed by others
Literature cited
E. M. Kerwin, "Damping of flexural waves by constrained viscoelastic layer," J. Acoust. Soc.,31, No. 7, 952–962 (1959).
D. I. Mead and S. Markus, "Loss factors and resonant frequencies of encased damped sandwich beams," J. Sound Vibr.,12, No. 1, 99–112 (1970).
V. V. Bolotin, "Vibration of layered elastic plates," Proc. Vibr. Probl.,4, No. 4, 331–346 (1963).
V. V. Bolotin, "Strength, stability, and vibrations of multilayer plates," in: Strength Calculations [in Russian], No. 11, Moscow (1965), pp. 31–63.
V. N. Moskalenko and Yu. N. Novichkov, "Bending of thick multilayer shells," Izv. Akad. Nauk SSSR Mekh. Tverd. Tela, No. 3, 149–154 (1968).
Yu. N. Rabotnov, Elements of the Inherent Mechanics of Solids [in Russian], Moscow (1977).
R. M. Christensen, Theory of Viscoelasticity, Academic Press (1970).
V. V. Bolotin, "Energy scattering for vibrations of constructions from reinforced polymers," in: Reports of the Scientific-Technical Conference of the Moscow Power Institute. Power-Engineering Section: Machine Dynamics and Strength Subsection [in Russian], Moscow (1967), pp. 9–25.
Additional information
Moscow Power Institute. Translated from Mekhanika Polimerov, No. 2, pp. 269–276, March–April, 1978.
Rights and permissions
About this article
Cite this article
Bolotin, V.V., Litvinov, A.N. Theory of vibration-damping polymeric coatings. Polymer Mechanics 14, 216–222 (1978). https://doi.org/10.1007/BF00857465
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00857465