Abstract
An optimum multilayer shell is designed whose stack of elementary layers has a nonuniform thickness. This optimization problem is solved numerically for the special cases of three-layer cylindrical shells with dynamic and static stability. The optimum variants of layer distribution in this model are compared with the optimum solutions in [1].
Similar content being viewed by others
Literature cited
V. L. Narusberg, R. B. Rikards, and G. A. Teters, "One problem of designing a minimum-weight multilayer shell," in: Proceedings of the Tenth All-Union Conference on the Theory of Plates and Shells [in Russian], Vol. 2, Tbilisi (1975), pp. 622–633.
Ya. I. Godes and Yu. M. Pochtman, "Problem of selecting the optimum parameters for a cylindrical glass-plastic shell under axial compression," Mekh. Polim., No. 5, 945–946 (1972).
A. B. Mitkevich and V. D. Protasov, "Optimization of uniform-strength reinforced cylindrical pressure vessels for stability under axial compression," Mekh. Polim., No. 6, 1123–1126 (1973).
R. B. Rikards and G. A. Teters, "Selection of the optimum parameters for a cylindrical glass-plastic shell under axial compression," Mekh. Polim., No. 6, 1132–1134 (1970).
R. B. Rikards, G. A. Teters, and I. K. Tsypinas, "Design of optimum cylindrical shells of reinforced plastics for external pressure and axial compression," Mekh. Polim., No. 2, 301–309 (1972).
R. B. Rikards, "A dual problem of optimizing an orthotropic cylindrical shell," Mekh. Polim., No. 5, 865–871 (1975).
R. B. Rikards, "Optimum circular—cylindrical shell under compression," Mekh. Polim., No. 5, 944–947 (1975).
R. B. Rikards and G. A. Teters, Stability of Shells Made of Composite Materials [in Russian], Riga (1974).
Yu. V. Nemirovskii and V. I. Samsonov, "Cylindrical reinforced shells most stable under omnilateral external pressure," Mekh. Polim., No. 1, 75–83 (1974).
A. K. Malmeister, V. P. Tamuzh, and G. A. Teters, Resistance of Rigid Polymer Materials [in Russian], 2nd ed., Riga (1972).
I. B. Rosen, "The gradient projection method of nonlinear programming. 2. Nonlinear constraints," J. Soc. Industr. Appl. Math.,9, 514–532 (1961).
L. J. Broutman and R. H. Krock (editors), Modern Composite Materials, Addison-Wesley (1967).
Additional information
Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 298–303, March–April, 1976.
Rights and permissions
About this article
Cite this article
Narusberg, V.L., Rikards, R.B. & Teters, G.A. Optimization of reinforced cylindrical shells with nonuniform thickness. Polymer Mechanics 12, 257–262 (1976). https://doi.org/10.1007/BF00856462
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00856462