Abstract
The creep behavior of an orthotropic glass-reinforced plastic based on Polimal'-109 resin and 19-S4 glass fabric is described. A special device for testing tubular specimens in plane-stress creep has been designed. The loading conditions include combined torsion and tension, internal pressure, and loading along the principal directions of anisotropy. Constitutive equations describing creep and recovery are proposed for the two-dimensional case.
Similar content being viewed by others
Literature cited
S. Ochelski, Wlasnosci reologiczne ortotropowysh tworzyw wzmocnionych w plaskim stanienaprezenia, doctoral dissertation, Warsaw (1968).
L. V. Baev and N. I. Malinin, Plast. Massy, No. 7 (1964).
G. I. Bryzgalin, Zh. Prikl. Mekhan. i tekh. Fiz., No. 3 (1962).
M. A. Koltunov, Vestn. MGU. Matem., Mekhan., No. 4 (1965).
M. A. Koltunov and V. N. Bezukhov, Vestn. MGU. Matem., Mekhan., No. 6 (1963).
M. A. Koltunov, Mekhan. Polim., No. 4, 483 (1966).
S. P. Ponomarev, Strength Calculations in Machine Building, Vol. 2 [in Russian], Moscow (1958), Ch. 13.
Yu. N. Rabotnov, Creep of Structural Elements [in Russian], Moscow (1966).
Additional information
Warsaw. Translated from Mekhanika Polimerov, No. 3, pp. 398–410, May–June, 1971.
Rights and permissions
About this article
Cite this article
Ochelski, S. Plane-stress creep of a glass-reinforced plastic. Polymer Mechanics 7, 357–367 (1971). https://doi.org/10.1007/BF00854786
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00854786