Abstract
The processes of heat release, heat-flow distribution, and combined heat-mass transfer in sliding contact are analyzed on the basis of measurements of the heat flux directed into one member of a friction pair.
Similar content being viewed by others
Literature cited
V. A. Balakin, “Friction and wear of metals at high slip velocities,” in: Handbook of Friction, Wear, and Lubrication [in Russian], Vol. 1, Mashinostroenie, Moscow (1978), pp. 175–178.
V. A. Balakin, “Selection of materials of friction pairs for high-speed machines and friction components,” Vestn. Mashinostr. No. 3, 17–19 (1979).
V. A. Balakin, Fundamentals of Surface-Layer Strength [in Russian], Gomel State Univ. (1974).
V. A. Balakin and N. I. Sinyuk, “Analytical-experimental method for analyzing the heat distribution at the interface of a high-speed and a heavily loaded sliding contact,” in: Proc. All-Union Sci.-Tech. Sem. Influence of Surface Quality on the Service Characteristics of Moving Couplings in Machines [in Russian], Vol. 2, VSNTO, Moscow (1979), pp. 129–131.
S. A. Seregin and V. I. Lyulenkov, “Temperature of the contact surface in friction of metals,” in: Friction Thermodynamics [in Russian], Nauka, Moscow (1970), pp. 122–126.
V. A. Krivtsov and N. P. Kharitonov, Microthermocouples for Precision Temperature Measurements [in Russian], Nauka, Leningrad (1966).
Yu. P. Shlykov, “Thermal resistance of contact between metal surfaces,” in: General Heat- and Mass-Transfer Problems [in Russian], Nauka i Tekhnika, Minsk (1966), pp. 237–246.
Author information
Authors and Affiliations
Additional information
Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 40, No. 6, 1083–1089, June, 1981.
Rights and permissions
About this article
Cite this article
Balakin, V.A. Heat-flow distribution and combined heat-mass transfer processes at the contact interface of a friction pair. Journal of Engineering Physics 40, 660–665 (1981). https://doi.org/10.1007/BF00825458
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00825458