Conclusions
-
1.
We established the dependence of modulus of normal elasticity and hardness on the temperature of Fe-Ni alloys.
-
2.
By microstructural analysis of Fe-Ni alloy specimens, we established a correspondence with the phase diagram of the given system. The microstructure was brought to light by chemical etching.
-
3.
It was shown that the microstructure of a polished surface is substantially different from the structure in the specimen after 3 hours soaking at 1100° followed by cooling in a vacuum of about 5 × 10−5 mm Hg.
Similar content being viewed by others
References
M. G. Lozinskiy, High-Temperature Metallography, Mashgiz, 1956.
M. G. Lozinskiy and A. Ye. Fedorovskiy, Acad. Sci. USSR, OTN, Vol. 5, 1958.
M. Hansen, Structures of binary alloys, Vol. 2, Metallurgizdat, 1941.
Rights and permissions
About this article
Cite this article
Assonova, Y.A., Lozinskiy, M.G. Effect of temperature on variation in hardness and modulus of elasticity in alloys in the system Fe-Ni. Met Sci Heat Treat 4, 415–418 (1962). https://doi.org/10.1007/BF00820027
Issue Date:
DOI: https://doi.org/10.1007/BF00820027