Abstract
The formation of spalls with penetration of different types of indenters into rock is modeled by the finite-element method. Conditions in which there is chipping of rock pillars between penetrated indenters are investigated.
Similar content being viewed by others
Literature cited
A. I. Spivak and A. N. Popov,The Mechanics of Rocks [in Russian], Nedra, Moscow (1975).
Yu. V. Kolesnikov and E. M. Morozov,The Mechanics of Contact Breaking [in Russian], Nauka, Moscow (1989).
Kh. Bok (ed.),Introduction to the Mechanics of Hard Rocks [Russian translation], Mir, Moscow (1982).
G. V. Artsimovich, E. P. Poladko, and I. A. Sveshnikov,Investigation and Development of a Rock-Breaking Tool for Drilling [in Russian], Nauka, Novosibirsk (1978).
N. Dzh. Al'tiero and D. L. Sikarski,Application of the Method of Integral Equations to Problems on Tool Penetration in Mechanics of Rocks, Method of Boundary Equations [Russian translation], Mir, Moscow (1978), pp. 152–182.
Yu. B. Gnuchii, I. A. Sveshnikov, V. V. Borisenko, and V. A. Podaroga, “Application of the method of finite elements to problems on tool penetration into destructible rock,”Probl. Prochn., No. 8, 106–110 (1987).
Yu. B. Gnuchii, I. A. Sveshnikov, V. V. Borisenko, and V. A. Podoroga, “Formation of a spall in the penetration of several rock-breaking indenters into rock,”Probl. Prochn., No. 11, 47–51 (1988).
Yu. B. Gnuchii, I. A. Sveshnikov, V. A. Podoroga, and V. V. Borisenko, “An effective method of breaking up the angular section of a bottom hole,”Probl. Prochn., No. 12, 99–101 (1988).
Additional information
Translated from Problemy Prochnosti, No. 2, pp. 111–114, February, 1990.
Rights and permissions
About this article
Cite this article
Gnuchii, Y.B., Sveshnikov, I.A., Podoroga, V.A. et al. Stability of rock pillars between penetrated rock-breaking indenters. Strength Mater 22, 296–300 (1990). https://doi.org/10.1007/BF00773254
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00773254