Skip to main content
SpringerLink
Log in

Gamma titanium aluminide research and applications in Germany and Austria

  • Published:
Advanced Performance Materials

Abstract

Research and applications of γ-base titanium aluminide alloys in Germany and Austria are reviewed. Special emphasis is given to the results of three major German national materials research projects: (i) gas turbine components, (ii) sheet and foil material, and (iii) automotive components. TiAl turbine blades and valves were successfully tested, and sheets are planned to be used in hypersonic applications. Powder metallurgy methods have been developed as alternative processing routes. Basic investigations on phase diagrams were carried out as a base for alloy development and high-resolution electron microscopic methods have led to a better understanding of the mechanical behaviour.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Appel, F., Beaven, P.A., and Wagner, R. 1993.Acta Metall. Mater. 41, 1721–1732.

    Google Scholar 

  2. Appel, F., Christoph, U., Beaven, P.A., and Wagner, R. 1993. In Y. Hosoi, H. Yoshinaga, H. Oikawa, and K. Maruyama (eds.), Aspects of High Temperature Deformation and Fracture in Crystalline Materials, The Japan Inst. of Metals, Sendai, Japan, 349–356.

    Google Scholar 

  3. Appel, F. and Wagner, R. 1993.Physica Scripta T49, 387–392.

  4. Bartels, A. and Mecking, H. 1992. In: C.T. Liu, R.W. Cahn, and G. Sauthoff (eds.), Ordered Intermetallics—Physical Metallurgy and Mechanical Behaviour,Nato ASI Series E, Applied Sciences, No. 213, Kluwer Academic Publishers, Dordrecht, The Netherlands, 663–678.

    Google Scholar 

  5. Bartels, A., Koeppe, C., Wurzwallner, K., Schretter, P., and Clemens, H. 1993. In H. Bildstein and P. Eck (eds.), Proc. 13th International Plansee Seminar, Vol. 3, Metallwerk Plansee, Reutte, Austria, 564–577.

    Google Scholar 

  6. Bartels, A., Seeger, J., and Mecking, H. 1993. In I. Baker, r. Darolia, J.D. Whittenberger, and M.H. Yoo (eds.), High-Temperature Ordered Intermetallic Alloys V,MRS Symp. Proc. 288, Materials Research Society, Pittsburgh, PA, 1179–1184.

  7. Beaven, P.A., Pfullmann, T., Rogalla, J., and Wagner, R. 1991. In L.A Johnson, D.P. Pope, and J.O. Stiegler (eds.), High-Temperature Ordered Intermetallic Alloys IV,MRS Symp. Proc. 213, Materials Research Soceity, Pittsburgh, PA, 151–156.

  8. Beaven, P.A., Appel, F., Dogan, B., and Wagner, R. 1992. In C.T. Liu, G.W. Cahn, and G. Sauthoff (eds.), Ordered Intermetallics—Physical Metallurgy and Mechanical Behaviour,Nato ASI Series E, Applied Science, No. 213, Kluwer Academic Publishers, Dordrecht, The Netherlands, 413–432.

    Google Scholar 

  9. Beaven, P.A. and Pfullmann, Th. 1993. In T.L. Lin and C.T. Liu (eds.), Ordered Intermetallics (IWOI'92), National Natural Science Foundation of China, 115–129.

  10. Becker, S., Rahmel, A., Schorr, M., and Schütze, M.: 1992. Oxidation of Metals, 38, 425–463.

    Google Scholar 

  11. Becker, S., Schütze, M., and Rahmel, A. 1993. Oxidation of Metals, 39, 93–105.

    Google Scholar 

  12. Behr, R. 1994. Unpublished results.

  13. Bohnenkamp. U., Wang, G.-W., Jewett, T.J., and Dahms, M., Intermetallics, accepted for publication.

  14. Bormann, R. and Zölter, K. 1992. Phys. stat. sol. (a) 131, 681–705.

    Google Scholar 

  15. Bormann, R. 1992. Unpublished results.

  16. Bormann, R. 1993. In F. Aldinger (ed.), Materials by Powder Technology, PTM 93, DGM Informationsgesellschaft, Obserursel, Germany, 247.

    Google Scholar 

  17. Chan, K.S. and Kim, Y.-W. 1991. In Y.-W. Kim and R.R. Boyer (eds.), Microstructure/Property Relationships in Titanium Aluminides and Alloys, TMS, Warrendale, PA, 179.

    Google Scholar 

  18. Chen, Shipu 1988. Dr-Ing. Thesis. TU Hamburg-Harburg.

  19. Chen, S., Beaven, P.A., and Wagner, R. 1992.Scripta Metall. Mater., 26, 1205–1210.

    Google Scholar 

  20. Choi, B.W., Deng, Y.G., McCullough, C., Paden, B., and Mehrabian, R. 1990.Acta Metall. Mater., 38, 2225.

    Google Scholar 

  21. Clemens, H., Schretter, P., Wurzwallner, K., Bartels, A., and Koeppe, C. 1993. In R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal (eds.), Structural Intermetallics, TMS, Warrendale, PA, 205–214.

    Google Scholar 

  22. Clemens, H., Schretter, P., Rumberg, I., Witwer, M., and Kneringer, G. 1993.44th Congress of the International Astronautical Federation, International Astronautical Federation, IAF-93-I.3.132.

  23. Clemens, H., Schretter, P., Köck, W., and Kneringer, G. 1993. METALL 47, 547–550

    Google Scholar 

  24. Clemens, H., Rumberg, I., Schretter, P., and Schwantes, S., submitted to Intermetallics.

  25. Dahms, M. 1989. Mat. Sci. Eng., A 110, L5-L8.

    Google Scholar 

  26. Dahms, M., Seeger, J., Smarsly, W., and Wildhagen, B., 1991. ISIJ International, 31, 1093–1099.

    Google Scholar 

  27. Dahms, M., Schmelzer, F., Seeger, J., and Wildhagen, B. 1992. Mat. Sci. Tech., 8, 359–362.

    Google Scholar 

  28. Dahms, M. and Schwantes, S. 1992. Mat. Sci. Eng. A 151, L27-L29.

    Google Scholar 

  29. Dahms, M., Leitner, G., Poeßnecker, W., Schultrich, S., and Schmelzer, F. 1993. Z. Metallkunde, 84, 351–357.

    Google Scholar 

  30. Dahms, M. and Wang, G.-X. 1994. In Y. Bando and K.K. Kosuge (eds.),Proc. 1993 Powder Metallurgy World Congress, JSPM, Kyoto, Japan, 409–411.

  31. Dahms, M. 1994. Unpublished research.

  32. Dogan, B., Wagner, R., and Beaven, P.A. 1991.Scripta Metall. Mater., 25, 773–778.

    Google Scholar 

  33. Dogan, B., Beaven, P.A., and Wagner, R. 1992. In M.H. Loretto and C.J. Beevers (eds.), The Processing, Properties and Applications of Metallic and Ceramic Materials, MCE Publications Ltd., Birmingham, UK, 429–434.

    Google Scholar 

  34. Dogan, B., Wang, G.-X., and Dahms, M. 1993.Scripta Metall. Mater. 29, 943–948.

    Google Scholar 

  35. Dogan, B. 1994. Unpublished research.

  36. Es-Souni, M., Wagner, R., and Beaven, P.A. 1992. Mat. Sci. Eng. A 153, 444.

    Google Scholar 

  37. Es-Souni, M., Bartels, A., and Wagner, R. 1993. Mat. Sci. Eng. A 171, 127–141.

    Google Scholar 

  38. Es-Souni, M., Bartels, A., Wagner, R. 1993, and R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal, Structural Intermetallics, TMS, Warrendale, PA, 335–343.

    Google Scholar 

  39. Es-Souni, M., Koeppe, M., Bartels, A., Beaven, P.A., and Wagner, R. 1993. Microstructural Science, 20, 297–310.

    Google Scholar 

  40. Es-Souni, M., Bartels, A., and Wagner, R., submitted toActa Metall. Mater.

  41. Eylon, D., Yolton, C.F., Clemens, H., Schretter, P., and Jones, P.E. 1994. InProc. 1994 Powder Metallurgy World Congress, Vol. 2, Les editions de physique. Les Ulis, France, 1271–1275.

    Google Scholar 

  42. Frommeyer, G., Kremser, T., and Wunderlich, W. 1993. In F.H. Froes and I.L. Caplan (eds.), Titanium '92—Science and Technology, Vol. 2, TMS, Warrendale, PA, 1299–1308.

    Google Scholar 

  43. Frommeyer, G., Tank, E., Rommerskirchen, M., Sibum, H., and Nicolai, H.-P. 1993. InProc. Intern. Symp. on Automotive Technology and Automation (ISATA), Automotive Automation Ltd., Croydon, UK, 61–70.

  44. Frommeyer, G. 1994. Unpublished research.

  45. Fukotomi, H., Hartig, C., and Mecking, H. 1990. Z. Metallkunde, 81, 272–277.

    Google Scholar 

  46. Gerling, R., Schmansky, F.P., and Wagner, R. 1992. In J.M. Capus and R.M. German (eds.), Advances in Powder Metallurgy & Particulate Materials—1992, Vol. 1, MPIF, Princeton, NJ, 215–222.

    Google Scholar 

  47. Gerling, R., Schimansky, F.P., and Wagner, R. 1993. In F.H. Froes and I.L. Caplan (eds), Titanium '92—Science and Technology, Vol. 2, TMS, Warrendale, PA, 1025–1032.

    Google Scholar 

  48. Gerling, R., Schimansky, F.P., and Wagner, R. 1993. In F. Aldinger (ed.), Materials by Powder Technology—PTM 93, DGM Informationsgesellschaft, Oberursel, Germany, 379–384.

    Google Scholar 

  49. Gerling, R., Schimansky, F.P., and Wagner, R. 1994. InProc. 1994 Powder Metallurgy World Congress, Vol. 1, Les éditions de physique, Les Ulis, France, 387–390.

    Google Scholar 

  50. Gil, A., Hoven, H., Wallura, E., and Quadakkers, W.J. 1993. Corrosion Science 34, 615–630.

    Google Scholar 

  51. Gil, A., Wallura, E., Grübmeier, W., and Quadakkers, W.J. 1993.J. Mat. Sci. 28, 5869–5874.

    Google Scholar 

  52. Hartig, C., Chen, S., Beaven, P.A., and Fukotomi, H. 1989. In P. Lacombe, R. Tricot and G. Biranger (eds.),Proc. Sixth World Conf. on Titanium, Vol. 2, Les éditions de physique, Les Ulis, France, 1021–1026.

    Google Scholar 

  53. Hartig, C., Fang, X.-F., Mecking, H., and Dahms, M. 1992.Acta Metall Mater. 40, 1883–1894.

    Google Scholar 

  54. Hartig, C. and Mecking, H. 1993. In H. Fukotomi and M. Yamaguchi (eds.),Proc. 3rd International SAMPE Symposium, The Japan Chapter of SAMPE, 1556–1563.

  55. Herold-Schmidt, U., Opolka, B., and Schwantes, S. 1992. Sonderband Prakt. Met., 23, 74–76.

    Google Scholar 

  56. Herold-Schmidt, U., Schwantes, S., and Broden, G. 1992. In J. Brandr and H. Hornfeld (eds.), Advanced Materials and Structures from Research to Application,SAMPE, Basel, Switzerland, 143–154.

    Google Scholar 

  57. Herold-Schmidt, U., Kühnle, H., and Schwantes, S. 1993. In H. Bildstein and P. Eck (eds.),proc. 13th International Plansee Seminar, Vol. 3, Reutte, Austria.

  58. Horn, H. 1991. In Pro. Eurojoin 1.

  59. Horn, H. 1992. VDI Berichte, 917, 369–372.

    Google Scholar 

  60. Horn, H. 1993. In H. Bildstein and R. Eck (eds.),Proc. 13th International Plansee Seminar, vol. 3, Metallwerk Plansee, Reutte, Austria, 595–606.

    Google Scholar 

  61. Hsu, F.Y., Klaar, H.J., Wang, G.-X., and Dahms, M. 1993. InProc. Metallographie-Tagung, in the press.

  62. Huang, S.C. and Siemers, P.A. 1989. Met. Trans. 20A, 1899–1906.

    Google Scholar 

  63. Inui, H., Nakamura, A., and Yamaguchi, M. 1991. In L.A. Johnson, D.P. Pope and J.O. Stiegler (eds.), High-Temperature Ordered Intermetallic Alloys IV,MRS Symp. Proc. 213, Materials Research Society, Pittsburgh, PA, 569.

  64. Jüngling, T., Morgenthal, I., and Kieback, B. 1994. InProc. 1994 Powder Metallurgy World Congress, Vol. 1, Les éditions de physique, Les Ulis, France, 491–494.

    Google Scholar 

  65. Kieback, B., Morgenthal, I., Nerger, D., and Dahms, M. 1994. InProc. 1994 Powder Metallurgy World Congress, Vol. 2, Les éditions de physique, Les Ulis, France, 1267–1270.

    Google Scholar 

  66. Kim, Y.-W. and Dimiduk, D.M. 1991. JOM 43 (8), 40–47.

    Google Scholar 

  67. Klassen, T., Oehring, M., and Bormann, R. 1994.J. Mater, Res., 5, 47.

    Google Scholar 

  68. Koeppe, C., Seeger, J., Bartels, A., and Mecking, H. 1993. Met. Trans. A 24: 1795–1806.

    Google Scholar 

  69. Kremser, Th. 1992. Dr.-Ing. Thesis. TU Clausthal.

  70. Kühnle, H. 1994. Unpublished research.

  71. Leitner, G., Dahms, M., Poeßnecker, W., and Wildhagen, B. 1992. InProceedings of the International Conference on PM Aerospace Materials 1991, MPR Publishing Services, Shrewsbury, UK, 18/1–18/13.

  72. Leitner, G., Bormann, R., Poeßnecker, W., Schultrich, S., Oehring, M., and Peschka, C. 1993. In F. Aldinger (ed.), Materials by Powder Technology, PTM 93, DGM Informationsgesellschaft, Oherursel, Germany, 277.

    Google Scholar 

  73. Leitner, G. and Laenicke-Rössler, K. 1993. In R. Pichoir and P. Costa (eds.),Proc. Euromat '93, Les éditions de physique, Les Ulis, France, 403–410.

    Google Scholar 

  74. Leitner, G., Dahms, M., Jaenicke-Rössler, K., Schultrich, S., and Wang, G.-X. 1994. InProc. 1994 Powder metallurgy World Congress, Vol. 2, Les éditions de physique, Les Ulis, France, 1229–1234

    Google Scholar 

  75. Liu, Z.G., Frommeyer, G., and Kreuss, M. 1991.Scripta Metall. Mater. 25, 1205–1210.

    Google Scholar 

  76. Liu, Z.G., Frommeyer, G., and Kreuss, M. 1991.Phil. Mag. Letters, 64, 117–124.

    Google Scholar 

  77. Liu, Z.G., Frommeyer, G., and Kreuss, M. 1992. Phys. stat. sol. (a), 131, 495–508.

    Google Scholar 

  78. Lukas, H.L. and Henig, E.-T. 1977. CALPHAD 1 225.

  79. McCullogh, C., Valencia, J.J., Mateos, H., Levi, C.G., and Mehrabian, R. 1988.Scripta metal Mater., 22, 1131–1136.

    Google Scholar 

  80. McCullogh, C., Valencia, J.J., Levi, C.G., and Mehrabian, R. 1989.Acta Metall. Mater. 37, 1321.

    Google Scholar 

  81. Mecking, H., Seeger, J., Hartig, C., and Bartles, A. 1991. in F.J. Bremer (ed.) Intermetallische Phasen als Strukturwerkstoffe für höhere Temperaturen, Vol. 6, Konferenzen des Forschungszentrums Jülich, Jülich, Germany.

  82. Mecking, H., Seeger, J., Hartig, C., and Frommeyer, G. InProc. ICOTOM 10, in the press.

  83. Mishurda, J.C., Lin, J.C., Chang, Y.A., and Perepezko, J.H. 1989. In C.T. Liu, A.I. Taub, N.S. Stoloff, and C.C. Koch (eds.), High Temperature Ordered Intermetallic Alloys III,MRS Symp. Proc. 133, Materials Research Society, Pittsburgh, PA, 57–92.

  84. Mohandas, E., Beaven, P.A., and Wagner, R. 1992.Scripta Metall. Mater., 25, 2023.

    Google Scholar 

  85. Morgenthal, I., Hübner, G., Kieback, B. and Nerger, D. 1994. Inproc. 1994 Powder Metallurgy World Congress, Vol. 2, Les éditions physique, Les Ulis, France, 1247–1250.

    Google Scholar 

  86. Müller, K.B., Neubert, X., and Dahms, M. 1992. In J.M. Capus and R.M. German (eds.), Advances in Powder Metallurgy & Particulate Materials—1992, Vol. 7, MPIF, Princeton, NJ, 139–153.

    Google Scholar 

  87. Müller, K., Neubert, X., Beaven, P., and Rommerskirchen, M. 1993. In H. Fukotomi and Yamaguchi (eds.),Proc. 3rd International SAMPE Symposium, The Japan Chapter of SAMPE 1564-1569.

  88. Oehring, M., Yan, Z.H., Klassen, T., and Bormann, R. 1992.Phys. stat. sol. (a), 131, 671–689.

    Google Scholar 

  89. Oehring, M., Klassen, T., and Bormann, T. 1993.J. Mater, Res., 8, 2819–2829.

    Google Scholar 

  90. Oehring, M., Klassen, T., and Bormann, R. 1993. In I. Baker, R. Darolia, J.D. Whittenberger, and M.H. Yoo (eds.), High Temperature Ordered Intermetallic Alloys V,MRS Symp. Proc. 288, Materials Research Society, Pittsburgh, PA, 873–878.

  91. Pfullmann, Th. 1988. Diploma Thesis, TU Hamburg-Harburg.

  92. Pfullmann, Th. and Beaven, P.A. 1993.Scripta Metall. Mater., 28, 275–280.

    Google Scholar 

  93. Pfullmann, Th. 1994. Dr.-Ing. Thesis. TU Hamburg-Harburg.

  94. Pirwitz, F., Wang, G.-X., Dahms, M., and Töbke, G. 1993. In F. Aldinger (ed.), Materials by Powder Technology—PTM '93, DGM Informationsgesellschaft, Obserusel, Germany, 385–390.

    Google Scholar 

  95. Pirwitz, F., Dahms, M., Wang, G.-X., Hülsmann, S.W., and Nerger, D. 1994. In L. Delaey and H. Tas (eds.), Hot Isostatic Pressing '93, Elsevier Science B. V., Amsterdam, The Netherlands, 91–98.

    Google Scholar 

  96. Pirwitz, F. and Dahms, M. 1994. Unpublished research.

  97. Quadakkers, W.J., Elschner, A., Zheng, N., Schuster, H., and Nickel, H. 1993. In S.B. Newcomb and M.J. Bennett (eds.), Microscopy of Oxidation—2, The University Press, Cambridge, UK, 488–496.

    Google Scholar 

  98. Quadakkers, W.J., Elschner, A., Zheng, N., Zheng, N., and Nickel, H. 1993. Corrosion Control for Low-Cost Reliability, NACE International, Houston, TX, 3842–3851.

    Google Scholar 

  99. Quadakkers, W.J., Zheng, N., Gil, A., and Nickel, H. 1993. In. J. Costa and A.D. Mercer (eds.),Proc. 10th Eurocorr, 770–776.

  100. Reuss, S. and Vehoff, H. 1990.Scripta Metall. Mater., 24, 1021–1026.

    Google Scholar 

  101. Sauthoff, G. 1990. Z. Metallkunde, 81, 855–861.

    Google Scholar 

  102. Schütze, M. and Schmitz, M. 1993. InProc. IUMRS-ICAM-93, Vol. 1, The Materials Society of Japan, Tokyo.

    Google Scholar 

  103. Schwantes, S. 1994. Unpublished research.

  104. Seeger, J., Klein, J., and Mecking, H. 1990. Prak. Met., 27, 236–241

    Google Scholar 

  105. Seeger, J., Bartels, A., and Mecking, H. 1990.Scripta Metall. Mater., 25, 2523–2528.

    Google Scholar 

  106. Seeger, J., Hartig, C., Bartels, A., and Mecking, H. 1991. In L.A. Johnson, D.P. Pope, and J.O. Stiegler (eds.), High-Temperature Ordered Intermetallic Alloys IV,MRS Symp. Proc. 213, Materials Research Society, 157–163.

  107. Seeger, J. 1993. Dr.-Ing. Thesis. TU Hamburg-Harburg.

  108. Smarsly, W.G. and Dahms, M. 1990. InProceeding of the World Conference on Powder Metallurgy, vol. 2, The Institute of Metals, London, Uk, 86–92.

    Google Scholar 

  109. Smarsly, W.G. and Dahms, M. 1991. In O. Izumi (ed.), Intermetallic Compounds—Structure and Mechanical Properties, The Japan Institute of Metals, Sendai, Japan, 947–952.

    Google Scholar 

  110. Smarsly, W.G. InProc. 1993 European Propulsion Forum, Royal Aeronautical Society, Bath, UK, 22/1–22/9.

  111. Tönnes, C., Rösler, J., Baumann, R., and Thumann, M. 1993. In R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal (eds.), Structural Intermetallics, TMS, Warrendale, PA, 214–246.

    Google Scholar 

  112. Vaidya, W. 1994. Unpublished results.

  113. Wagner, R., Gerling, R., Schimansky, F.P., Beaven, P.A., and Dahms, M. 1991. In F.J. Bremer (ed.), Intermetallische Phasen als Strukturwerkstoffe für hohe Temperaturen, KFA, Jülich, Germany, 525

    Google Scholar 

  114. Wagner, R., Es-Souni, M., Chen, D., Dogan, B., Seeger, J., and Beaven, P.A. 1991. In L.A. Johnson, D.P. Pope and J.O. Stiegler (eds.), High-Temperature Ordered Intermetallic Alloys IV,MRS Symp. Proc. 213, Materials Research Society, Pittsburgh, PA, 1107.

  115. Wagner, R., Appel, F., Bormann, R., and Gerling, R. 1993. In H. Fukotomi and M. Yamaguchi (eds.),Proc. 3rd International SAMPE Symposium, The Japan Chapter of SAMPE 1548-1555.

  116. Wang, G.-X. and Dahms, M. 1992.Scripta Metall. Mater., 26, 1469–1474.

    Google Scholar 

  117. Wang, G.-X. and Dahms, M. 1992.Scripta Metall. Mater., 26, 717–722.

    Google Scholar 

  118. Wang, G.-X., Dahms, M., and Dogan, B. 1992.Scripta Metall. Mater., 27, 1651–1656.

    Google Scholar 

  119. Wang, G.-X. and Dahms, M. 1992. PMI, 24, 219–225.

    Google Scholar 

  120. Wang, G.-X., Bartels, A., and Dahms, M. 1993. Mater. Trans. JIM, 34, 228–235.

    Google Scholar 

  121. Wang, G.-X., Bohennkamp, U., and Dahms, M. 1993. Prakt. Met. Sonderband 24, 299–307.

    Google Scholar 

  122. Wang, G.-X. and Dahms, M. 1993. In Y. Hosoi, H. Yosigama, H. Oikawa and K. Maruyama (eds.), Aspects of High Temperature Deformation and Fracture in Crystalline Materials, The Japan Institute of Metals, Sendai, Japan, 365–372.

    Google Scholar 

  123. Wang, G.-X. and Dahms, M. 1993. Met. Trans. A 24, 1517–1526.

    Google Scholar 

  124. Wang, G.-X. and Dahms, M. 1993. In R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.B. Miracle, and M.V. Nathal (eds.), Structural Intermetallics, TMS, Warrendale, PA, 215–222.

    Google Scholar 

  125. Wang, G.-X. and Dahms, M. 1993. JOM, 45, no. 5, 52–56.

    Google Scholar 

  126. Wang, G.-X., Dahms, M., and Pirwitz, F. 1993. In R. Pichoir and P. Costa (eds.),Proc. Euromat '93, Les éditions de physique, Les Ulis, France, 469–472.

    Google Scholar 

  127. Wunderlich, W., Kremser, T., and Frommeyer, G. 1990. Z. Metallkunde, 81, 802–808.

    Google Scholar 

  128. Wunderlich, W., Frommeyer, G., and Czarnowski, P.V. 1993. Mat. Sci. Eng. A., 164, 421–427.

    Google Scholar 

  129. Wunderlich, W., Kremser, T., and Frommeyer, G. 1993.Acta Metall. Mater., 41, 1791–1799.

    Google Scholar 

  130. Wurzwallner, K., Clemens, H., Schretter, P., Bartles, A., and Koeppe, C. 1993. In I. Baker, R. Darolia, J.D. Whittenberger, and M.H. Yoo (eds.), High-Temperature Ordered Intermetallic Alloys V,MRS Symp. Proc. 288, Material Research Society, Pittsburgh, PA, 867–872.

  131. Wurzwallner, K., Schretter, P., and Clemens, H. 1993. In H. Bildstein and P. Eck (eds.),Proc. 13th International Plansee Seminar, Vol. 3, Metallwerk Plansee, Reutte, Austria, 537.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institut für Werkstofforschung, GKSS Forschungszentrum Geesthacht GmbH, Max-Planck Straße, D-21502, Geesthacht, Germany

    Michael Dahms

Authors
  1. Michael Dahms
    View author publications

    You can also search for this author in PubMed Google Scholar

About this article

Cite this article

Dahms, M. Gamma titanium aluminide research and applications in Germany and Austria. Adv Perform Mater 1, 157–182 (1994). https://doi.org/10.1007/BF00713729

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1007/BF00713729

Keywords

Search

Navigation