Conclusion
Annealing in the intercritical area of the α→γ-transformation or hardening from a continuous furnace with subsequent tempering in the α→γ-transformation range included in the production plan for cold-rolled 08Kh15N5D2T tubing do not restore the original workability of the steel since the residual austenite is stabilized toward the γ→α-transformation in deformation. Annealing at 650°C does not lead to complete recrystallization and detexturing of the metal. To obtain this it is recommended that rapid electric heating for hardening with subsequent tempering be introduced into the production plan for rolling of tubing.
Similar content being viewed by others
Literature cited
N. V. Zvigintsev and I. P. Konakova, "Structural factors providing production plasticity of 08Kh15N5D2T steel in the production of cold-rolled tubing," Izv. Vyssh. Uchebn. Zaved., Chern. Met., No. 10, 154–155 (1987).
R. A. Adamesku, Yu. N. Markov, Yu. F. Khmelinin, and V. I. Yushkov, "Determination of the scattering of axial textures with use of the distributions of the intensity of the x-ray reflection", in: Physical Methods of Investigation of Solids [in Russian], No. 1, Ural. Politekh. Inst., Sverdlovsk (1975), pp. 24–27.
V. I. Yuskov, R. A. Adamescu, Ye. S. Machnev, et al., "The developments in texture in stainless steels," Mater. Sci. and Eng.,64, 157–169 (1984).
L. A. Mel'nikov, B. K. Sokolov, and A. I. Stregulin, "The influence of plastic deformation on the reverse martensite transformation in nickel iron," Fiz. Met. Metalloved.,17, No. 2, 313–315 (1964).
S. B. Nizhnik, S. P. Doroshenko, V. P. Ostrovskaya, and G. I. Usikova, "The influence of thermomechanical strengthening conditions on the formation of highly plastic conditions of maraging steels," in: The Working of Metals by Pressure [in Russian], No. 12, Ural. Politekh. Inst., Sverdlovsk (1985), pp. 49–53.
Yu. D. Koryagin, M. A. Smirnov, and G. I. Medvedeva, "The influence of plastic deformation temperature on the features of the martensite transformation in iron-nickel alloys," in: Questions of Production and Working of Steel: Proceedings of Chelyabinsk Polytechnic Institute [in Russian], No. 229, Chelyabinsk. Politekh. Inst., Chelyabinsk (1979), pp. 108–112.
Additional information
Ural Polytechnic Institute. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 8, pp. 7–11, August, 1990.
Rights and permissions
About this article
Cite this article
Zvigintsev, N.V., Yushkov, V.I., Khadyev, M.S. et al. Phase and structural transformations in deformation and heat treatment of 08Kh15N5D2T steel tubing. Met Sci Heat Treat 32, 559–564 (1990). https://doi.org/10.1007/BF00700704
Issue Date:
DOI: https://doi.org/10.1007/BF00700704