Abstract
A reduction of post-weld shift (PWS) in semiconductor laser packaging using a laser welding technique is presented. It is found that the PWS and its association with the power coupling loss of the laser packaging can be reduced under proper pressure constraint. Characteristics of defect mechanisms in laser welding techniques for semiconductor laser packaging are also investigated experimentally. The results in the stainless-to-Kovar joints show that the surface cracks are dependent on the Au thickness on the Kovar material. The low solubility of gold in the Kovar is identified as the defect mechanism for surface cracks. Preliminary reliability data demonstrated that these laser packages without crack defects in the welded joints are reliable.
Similar content being viewed by others
References
M. R.MATTHEWS, B. M.MACDONALD and K. R.PRESTON,IEEE Trans. Comp. Hybrids Manuf. Technol. 13 (1990) 798.
A. A.HOLLANDER and K. J.WATKIN,Photonics Spectra 10 (1993) 110.
S.JANG,Proc. SPIE 2610 (1995) 138.
B.VALK, R.BATTIG and O.ANTHAMATREN,Opt. Eng. 34 (1995) 2675.
J. C. CHEN, W. T. CHEN, S. T. CHANG, J. S. HORNG, H. H. LIN, W. H. CHENG and W. H. WANG,Conference on Lasers and Electro-Optics, Anaheim, CA, June 1996, p. 352.
S. C. WANG, Y. K. TU, C. J. HWANG, W. H. WANG and W. H. CHENG,Electronic Components and Technology Conference, Orlando, Florida, May 1996, p. 942.
P. SU, T. S. RAVI, D. D. MAHONEY and D. A. TAYLOR,OFC Technical Digest (1994) p. 144.
X. L. YEH, R. J. COYLE, P. P. SOLAN and P. L. SAKACH,Proc. ASM Int., 2nd Conference on Trends in Welding Research, Las Vegas, NV, May 1989, p. 661.
S.RANGWALA,J. Electronic Packaging 131 (1991) 343.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Cheng, W.H., Wang, W.H., Chen, J.C. et al. Reduction of post-weld shift in semiconductor laser packaging. Opt Quant Electron 28, 1741–1746 (1996). https://doi.org/10.1007/BF00698539
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00698539