Abstract
The effects on the dielectric properties of BaTiO3 of addition of CaZrO3 (0–17 wt%) has been investigated. Dielectric constants ranging between 2500 and 15 500 have been obtained by using commercial grade raw materials with the starting dielectric constant of the undoped BaTiO3 being 800. The capacitor dielectrics have also been analysed for their electrical properties, crystalline phases and microstructural features.
Similar content being viewed by others
References
S. L. SWARTZ, “Topics in electronic ceramics”,IEEE Trans. Electrical Insul. 25 (1990) 935–987.
T. MURAKAMI and A. YAMAJI, “Dy doped BaTiO3 ceramics for high voltage capacitor use”,Amer. Ceram. Soc. Bull. 55 (1976) 572.
U. SYAMAPRASAD, R. K. GALGALI and B. C. MOHANTY, “Dielectric properties of the Ba1−x Sr x TiO3 system”,Mater. Lett. 7 (1988) 197–200.
G. GOODMAN, “Ceramic capacitor materials”, in “Ceramic materials for electronics”, edited by R. C. Buchanan (Marcel Dekker, New York, 1986) p. 79–135.
M. MCQUARRIE, “Barium titanate and other ceramic ferro-electrics. I. introduction”,Bull. Amer. Ceram. Soc. 34 (1955) 169–172.
M. MCQUARRIE and F. W. BEHNKE, “Structural and Dielectric studies in the system (Ba, Ca) (Ti, Zr)O3”,J. Amer. Ceram. Soc. 37 (1954) 539–543.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Krishnamoorthy, P.R., Ramaswamy, P. & Narayana, B.H. CaZrO3 additives to enhance capacitance properties in BaTiO3 ceramic capacitors. J Mater Sci: Mater Electron 3, 176–180 (1992). https://doi.org/10.1007/BF00695517
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00695517