Literature cited
V. V. Bolotin, Multiparameter Mechanics of Failure. Strength Calculations [in Russian], No. 25, Moscow (1984), pp. 12–33.
V. V. Bolotin, “Damage and failure of composites ux une delamination type”, Mekh. Kompozit. Mater., No. 3, 424–428 (1987).
J. A. Rhys, “Mathematical methods in the mechanics of failure”, in: Failure [Russian translation], Vol. 2, Moscow (1975), pp. 204–336.
G. P. Cherepanov, Mechanics of Failure of Composite Materials [in Russian], Moscow (1983).
A. M. Mikhailov, “Some problems in the theory of cracks in the beam approximation”, Zh. Prikl. Mekh. Teor. Fiz., No. 5, 128–133 (1967).
A. Y. Smiley and R. B. Pipes, “Rate effects on mode I interlaminar fracture toughness in composite materials”, J. Compos. Mater.,21, 670–687 (1987).
D. F. Devitt, R. A. Schapery, and W. L. Bradley, “A method for determining the mode I delamination fracture toughness of elastic and viscoelastic composite materials”, J. Compos. Mater.,14, 270–285 (1980).
B. R. Trethewery, I. W. Gillespie, and L. A. Carlsson, “Mode II cyclic delamination growth”, J. Compos. Mater.,22, 459–483 (1988).
I. G. Williams, “Large displacement and end block effects in the “DCB“ interlaminar test in modes I and II”, J. Compos. Mater.,21, 330–347 (1987).
E. F. Rybicki, T. D. Hernandes, J. E. Deibler, R. C. Knight, and S. S. Vilson, “Mode I and mixed mode energy release rate values for delamination of graphite/epoxy test specimens”, J. Compos. Mater.,21, 105–123 (1987).
V. V. Bolotin, Z. Kh. Zebel'yan, and A. A. Kurzin, “Stability of compressed elements with delamination defects”, Probl. Prochn., No. 7, 3–8 (1980).
I. P. Zhelezko and N. I. Obodan, “Effect of delamination on the carrying capacity of shells”, Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 6, 153–158 (1986).
I. V. Shebunin, Study of Delamination of Composite Materials on Surface Heating, Candidate Dissertation, Moscow (1989).
V. V. Partsevskii and M. I. Speranskii, “Shear failure around openings in composites”, Mekh. Kompozit. Mater., No. 2, 263–267 (1990).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 6, pp. 1047–1050, November–December, 1990.
Rights and permissions
About this article
Cite this article
Partsevskii, V.V. Delamination of composite plates on bending. Mech Compos Mater 26, 758–761 (1991). https://doi.org/10.1007/BF00656660
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00656660