Conclusions
-
1.
Reinforcement by high-strength filaments and sheets can substantially increase the resistance to brittle fracture and the fatigue strength of materials. The optimal condition of reinforcing to obtain a high fatigue strength is a strong outer layer (for laminated materials) and a matrix not tending to rapid hardening in the process of deformation.
-
2.
The heat resistance can be increased by reinforcement only in the absence of chemical interaction between the matrix and the reinforcing fibers and the presence of a strong bond between them.
Similar content being viewed by others
Literature cited
W. Sutton and J. Chorne, Strengthening Mechanisms of Metals and Ceramics, Syracuse Univ. Press (1966).
V. S. Ivanova, Fizika i Khimiya Obrabotki Materialov, No. 1 (1967).
C. Schoene and E. Scala, J. Metals, No. 1 (1968).
G. Holister and C. Thomas, Fiber-Reinforced Materials (1966).
V. D. Katikhin et al., Khim. i Neft. Mashinostr., No. 4 (1966).
W. Sutton and J. Chorne, in: Fiber-Reinforced Materials [Russian translation], Mir (1967).
V. S. Ivanova and L. M. Ustinov, Fiz. i Khim. Obrabotka Materialov, No. 2 (1967).
G. Cooper and A. Kelly, J. Mech. Phys. Solids,15, No. 4 (1967).
O. Kelly and W. Tyson, J. Mech. Phys. Solids,13, No. 6 (1965).
E. Ellison and B. Harris, Applied Materials Research, No. 1 (1965).
R. Cairns and J. Charles, J. Iron Steel Inst.,205 (1967).
E. N. Astrov, Cladded Multilayer Metals [in Russian], Metallurgiya, Moscow (1965).
V. D. Katikhin, P. O. Pashkov, and A. A. Yavor, Scientific Reports of the Volgograd Polytechnical Institute [in Russian], Volgograd (1967).
T. Williams and J. Abdilla, Engineer,218, No. 5666 (1964).
S. N. Belorusov et al., Stal', No. 7 (1965).
Additional information
A. A. Baikov Institute of Metallurgy. Translated from Metallovedenie i Termicheskaya Obrabotka Metallov, No. 2, pp. 50–58, February, 1969.
Rights and permissions
About this article
Cite this article
Ivanova, V.S., Botvina, L.P. Reinforced metallic materials. Met Sci Heat Treat 11, 131–140 (1969). https://doi.org/10.1007/BF00652282
Issue Date:
DOI: https://doi.org/10.1007/BF00652282