Abstract
The quality of ceramic-metal bond is strongly influenced by the microstructure of the transition region between the ceramic and the metal. Sandwich-like ceramic-metal-ceramic specimens are fabricated by solid state bonding of 3 mol% yttria doped zirconia ceramic with nickel foils. Time dependence of the shear strength of the bonding assembly is evaluated at 900° C under a bonding pressure of 8.17 MPa. An optimum strength is obtained for the bonding time between 10 and 25 minutes. The shear strength is also measured as the function of the bonding pressure and bonding temperature. The dependence of the processing parameters on the shear strength of the bond assembly is investigated on the basis of the morphological development in the ceramic-metal interface. In addition, the effect of a pre-coated Ni film on the strength of YSZ/Ni bonding is discussed.
Similar content being viewed by others
References
H. J. de Bruin, A. F. Moodie andC. E. Warble,J. Mater. Sci.,7 (1972) 909.
A. J. Kinloch,J. Mater. Sci. 15 (1980) 2141.
R. V. Allen, W. E. Borbidge andP. T. Whelan, in “Science and Technology of Zirconia II”, edited by N. Claussen, M. Rühle and A. H. Heuer (The American Ceramic Society, 1984) p. 537.
T. Yamane, Y. Minamino, K. Hirao andH. Ohnishi,J. Mater. Sci. 21 (1986) 4227.
J. T. Klomp andA. J. C. van De Ven,J. Mater. Sci. 15 (1980) 2483.
S. L. Shinde andL. C. De Jonghe,J. Electron, Micro. Tech. 3 (1986) 361.
Australian Pat. 452651, U.S. Pat. 4050956, CSIRO and the Flinders University, South Australia.
TSK Ceramics Technical Bulletin, Toyo Soda Manufacturing Co. LTD. No. Z-112 (1986).
R. Hales andA. C. Hill,Corrosion Sci. 12 (1972) 843.
G. C. Wood, I. G. Wright andJ. M. Ferguson,Corrosion Sci. 5 (1965) 645.
F. N. Rhines, R. G. Connell Jr andM. S. Choi,J. Eleetrochem Soc. 126 (1979) 1061.
J. T. Klomp, in “Materials Research Society Symposium Proceedings vol. 40, edited by E. A. Giess, K. N. Tu and D. R. Uhlmann (Materials Research Society, U.S.A., 1985) p. 381.
F. P. Bailey andK. J. T. Black,J. Mater. Sci. 13 (1978) 1045.
Y. C. Wu, M.S. Dissertation, National Tsing Hua University (1987).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Duh, J.G., Wu, Y.C. & Chiou, B.S. Morphology, strength and pre-coating effect in YSZ/Nl bonding. J Mater Sci 25, 2626–2631 (1990). https://doi.org/10.1007/BF00638069
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00638069