Abstract
Sintering behaviour during hot pressing of SiC-TiC composite ceramics has been investigated with special emphasis on the effect of various processing parameters on the density and mechanical properties of the sintered body. At hot pressing temperatures greater than 2000° C, significant densification occurred in SiC-50 wt%TiC (−0.5 wt%B-1 wt%C) composites. The room temperature flexural strength of the sintered body increased with the hot pressing temperature up to 2000° C and reached a highest value of 710 MPa in accordance to the variation of density with temperature. In sintering of composites without additives, densification was enhanced with the addition of up to 25 wt%TiC, with relative densities higher than 98% observed when hot pressing at 2150° C for 2h.
Similar content being viewed by others
References
R. A. Alliegro, L. B. Coffin andJ. R. Tinklepaugh,J. Amer. Ceram. Soc. 39 (1956) 386.
F. F. Lange,J. Mater. Sci. 10 (1975) 314.
S. Prochazka, US Patent No. 4041 117 (1977).
T. Y. Kosolapova, “The Refractory Carbides” (Plenum Press, New York, 1971) pp. 1–17.
H. Kurishita, K. Nakajima andH. Yoshinaga,Mater. Sci. and Eng. 54 (1982) 177.
G. Das, K. S. Mazdiyasni andH. A. Lipsitt,J. Amer. Ceram. Soc. 65 (1982) 104.
C. Greskovich andJ. A. Palm,ibid. 63 (1980) 597.
F. F. Lange,ibid. 56 (1973) 445.
R. Ruh andA. Zangvil,ibid. 65 (1982) 260.
W. Rafaniello, K. Cho andA. V. Virkar,J. Mater. Sci. 16 (1981) 3479.
G. C. Wei andP. F. Becher,J. Amer. Ceram. Soc. 67 (1984) 571.
M. A. Janney,Amer. Ceram. Soc. Bull. 66 (1987) 322.
C. H. McMurtry, W. D. G. Boecker, S. G. Seshadri, J. S. Zanghi andJ. E. Garnier,ibid. 66 (1987) 325.
R. Jimbou, K. Takahashi, Y. Matsushita andT. Kosugi,Adv. Ceram. Mater. 1 (1986) 341.
Y. Matsushita, K. Nakamura andK. Harada, US Patent No. 4 555 358 (1985).
T. Nose andT. Fujii,J. Amer. Ceram. Soc. 71 (1988) 328.
H. Endo, K. Tanemoto andH. Kubo, Proceedings of International Institute for Science of Sintering (IISS) Symposium, Vol. 2 (1987) p. 1052.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Endo, H., Ueki, M. & Kubo, H. Hot pressing of SiC-TiC composites. J Mater Sci 25, 2503–2506 (1990). https://doi.org/10.1007/BF00638050
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/BF00638050