References
D. Broeck, Fundamentals of Fracture Mechanics [Russian translation], Vysshaya Shkola, Moscow (1980).
A. J. Smiley and R. B. Pipes, ”Rate effects on mode-1 interlaminar fracture toughness in composite materials,“ J. Comp. Mater.,21, July, 670–687 (1987).
S. Hashemi, A. J. Kinloch, and J. G. Williams, ”The effects of geometry, rate and temperature on the mode I, mode II and mixed mode I/II interlaminar fracture of carbon-fiber/polyether-ether ketone/composites,“ J. Comp. Mater.,24, September, 918–955 (1990).
E. J. Ripling, S. Mostovoy, and H. T. Corten, “Fracture mechanics: a tool for evaluating structural adhesives,” J. Adhesion,3, No. 2, 107–123 (1971).
A. J. Kinloch and S. I. Shaw, “The fracture resistance of a toughness epoxy adhesive,” J. Adhesion,12, No. 1, 59–77 (1981).
E. B. Trostyanskaya, A. S. Grabil'nikov, and G. V. Komarov, “Examination of special features of failure of adhesive joints based on rigid and elastified adhesives,” Mekh. Kompozitn. Mater., No. 3, 443–448 (1985).
D. F. Nutt, Fundamentals of Fracture Mechanics [Russian translation], Metallurgiya, Moscow (1978).
K. B. Bucknell, Shock-Resistant Plastics [Russian translation], Leningrad (1981).
W. L. Bradley and R. N. Cohen, “Matrix deformation and fracture in graphite reinforced epoxy,” in: Delamination and Debonding of Materials, ASTM STP No. 876, Philadelphia (1985), pp. 95–114.
J. Kalantar and L. T. Drzal, “The bonding mechanism of aramid fibers to epoxy matrices,” J. Mater. Sci.,22, 4186–4202 (1990).
R. S. Long, “Static strength of adhesively bonded ARALL-1 joints,” J. Comp. Mater.,25, April, 391–415 (1991).
L. B. Vogelesang, “Development of new hybrid material (ARALL) for aircraft structure,” Ind. Eng. Chem. Prod. Dev.,22, No. 3, 492–496 (1983).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, Vol. 30, No. 2, pp. 196–208, March–April, 1994.
Rights and permissions
About this article
Cite this article
Grabil'nikov, A.S., Mashinskaya, G.P., Zhelezina, G.F. et al. Interlaminar fracture toughness of a hybrid composite material of the alor type. Mech Compos Mater 30, 136–145 (1994). https://doi.org/10.1007/BF00635845
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00635845