Reference
International Directory of Ferrocement Organizations and Experts 1982–1984 compiled and edited by L. Robles-Austriaco, “Intern. Ferrocement Inform. Center.” Asian Institute of Technology, Bankok, Thailand.
B. K. Paul and R. P. Pama, Ferrocement, “Intern. Ferrocement Inform. Center.” Asian Institute of Technology, Bankok, Thailand, (1978).
R. N. Swamy and Y. B. I. Shaheen, Tensile Behavior of Thin Ferrocement Plates, ACI Publ., SP 124-18 (1989), pp. 357–387.
A. E. Naaman and S. P. Shah, “Tensile Test of Ferrocement” ACI J. (1971), September, pp. 693–698.
A. M. Skudra and F. J. Bulavs, Strength of Reinforced Plastics [in Russian], Moscow (1982).
A. A. Skudra, “Structural strength critera of angle-ply reinforced plastics” Diss. Dr. Sci. Ing. Riga: Polytechnical Institute, Riga (1984).
A. M. Skudra and A. A. Skudra, Introduction to strength of laminated materials. Riga: Technical University (1993).
A. A. Skudra, “Elastic characteristics of ferricement reinforced with woven meshes,” Mekh. Kompozn. Mater.,30, No. 4, 526–530 (1994).
A. M. Skudra, “Strength of concrete under torsion with the following tension,” Research of Concrete and Reinforced Concrete, Riga: Institute of Building and Architecture of Latvian Academy of Sciences (1959), Vol. 4, pp. 161–184.
S. B. Bhide and M. P. Collins, Reinforced Concrete Elements in Shear and Tension. University of Toronto, Department of Civil Engineering. Publication No. 87-02.
Author information
Authors and Affiliations
Additional information
Published in Mekhanika Kompozitnykh Materialov, Vol. 30, No. 5, pp. 619–625, September–October, 1994.
Rights and permissions
About this article
Cite this article
Skudra, A.A. First crack strength criterion of ferrocement under combined loading. Mech Compos Mater 30, 448–454 (1995). https://doi.org/10.1007/BF00616773
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00616773