Literature cited
L. A. Gann, “Study of the effect of the molecular characteristics of high-density polyethylene on preparation of oriented films,” Candidates Dissertation, Technical Sciences Leningrad (1983).
S. A. Tsygankov, N. P. Demenchuk, and G. D. Myasnikov, “Solid-phase formation of HDPE and LDPE by hydroextrusion and properties of the extrudates,” Plast. Massy, No. 9, 37–39 (1984).
V. A. Artem'ev, V. A. Duvakin, and A. Ya. Gol'dman, “Preparation of high-strength films from polyolefins,” in: Scientific and Technological Principles of Fabrication of High-Strength and High-Modulus Materials from Flexible-Chain Polymers [in Russian], Leningrad (1982), pp. 52–60.
V. A. Marikhin and G. D. Myasnikov, “Prospects for fabrication of high-strength and high-modulus polyolefin ribbons by orientational drawing,” in: Scientific and Technological Principles of Fabrication of High-Strength and High-Modulus Materials from Flexible-Chain Polymers [in Russian], Leningrad (1982), pp. 31–39.
P. N. Matveev, V. A. Savitskii, and V. G. Baranov, ◂Prospects for the use of orientational crystallization of polymers,” in: Scientific and Technological Principles of Fabrication of High-Strength and High-Modulus Materials from Flexible-Chain Polymers [in Russian], Leningrad (1982), pp. 39–52.
A. Richardson, B. Parsons, and I. M. Ward, “Production and properties of high stiffness polymer rod, sheet, and thick monofilament oriented by large-scale die drawing,” Plast. Rubber Proc. Appl., 6, No. 4, 347–361 (1986).
A. Kaito, K. Nakayama, and H. Kanetsu, “Preparation of high modulus polyethylene by the roller-drawing method,” J. Appl. Polym. Sci., 30, No. 3, 1241–1255 (1985).
A. Zachariades and R. S. Porter, “High modulus polymers. A new compression rolling process for polymers with high mechanical performance,” Polym. News, 12, No. 5, 138–139 (1987).
V. I. Kuzub, V. N. Kaminskii, S. A. Gordeev, A. N. D'yachkov, Yu. I. Mitchenko, and A. S. Chegolya, “Properties of high-strength, high-modulus polyethylene monofilaments,” Khim. Volokna, No. 2, 31–32 (1989).
A. V. Savitskii, I. A. Gorshkova, V. P. Demicheva, N. I. Frolova, and G. N. Shmikk, “Model of orientational strengthening and fabrication of high-strength polyethylene fibers,” Vysokomolek. Soedin., A26, No. 9, 1801–1809 (1984).
I. A. Gorshkova, G. N. Andreeva, A. V. Savitskii, and N. L. Frolova, “Properites of oriented fiber of high-molecular-weight polyethylenes,” Mekh. Kompozitn. Mater., No. 2, 326–330 (1987).
A. J. Pennings, R. J. van der Hoost, A. R. Postema, W. Hoogsten, and G. ten Brinke, “High speed gel-spinning of ultra-high molecular weight polyethylene,” Polym. Bull., 16, Nos. 2–3, 167–174 (1986).
P. Smith, P. J. Lemstra, and H. C. Booij, “Ultradrawing of High-molecular-weight polyethylene cast from solution. II. Influence of initial concentration,” J. Polym. Sci., Polym. Phys. Ed., 19, No. 5, 877–888 (1981).
Yu. M. Boiko, I. G. Kuznetsova, V. V. Kovriga, A. Ya. Gol'dman, A. M. Tarasov, V. A. Artem'ev, and G. D. Myasnikov, “Mechanical properties of polyethylene from orientational crystallization,” Mekh. Kompozitn. Mater., No. 2, 202–208 (1987).
Yu. M. Boiko and A. Ya. Gol'dman, “Viscoelastic properties of polyethylene prepared by orientational crystallization and their effect on the maximum mechanical characteristics,” Mekh. Kompozitn. Mater., No. 1, 24–31 (1990).
A. Ya. Gol'dman, Strength of Construction Plastics [in Russian], Leningrad (1979).
I. I. Perepechko, Acoustic Methods of Investigation of Polymers [in Russian], Moscow (1973).
A. Ya. Gol'dman, I. I. Perepechko, L. T. Kudryavtseva, V. V. Nizhegorodov, and M. A. Butuzova, “Viscoelastic properties of composite materials based on blends of crystallizable polymers,” Mekh. Kompozitn. Mater., No. 2, 207–215 (1986).
N. Alberola, J. Y. Cavaille, and J. Perez, “Mechanical spectrometry of high-density polyethylene,” J. Polym. Sci., Polym. Phys. Ed., 18, No. 4, 569–586 (1990).
I. V. Ivankina, I. G. Kuznetsova, and V. V. Kovriga, “Generalized expression for correlation of stress and strain in a wide range of temperatures for crystalline polymers with a different glass transition temperature,” Mekh. Kompozitn. Mater., No. 1, 142–145 (1984).
J. D. Ferry, Viscoelastic Properties of Polymers, 2nd ed., Wiley, New York (1961).
A. Ya. Gol'dman and A. M. Grinman, “Variant of the temperature-time analogy for partially crystalline polymers,” Mekh. Polim., No. 2, 261–269 (1974).
H. Kavai, S. Suehiro, T. Kyu, and A. Shimomura, “Rheooptical properties of spherulitic polyethylenes in relation to the alpha and beta mechanical dispersions,” Polym. Eng. Rev., Rec., Nos. 2–4, 109–136 (1983).
H. Kavai, S. Suehiro, T. Kyu, and A. Shimomura, “Rheooptical properties of spherulitic polyethylenes in relation to the alpha and the alpha and beta mechanical dispersion,” Polym. Eng. Rev., Nos. 2–4, 189–192 (1983).
R. S. Stein, R. S. Finkelstein, D. Y. Yoon, and C. Chang, “Time-temperature superposition of the fundamental relaxation processes of polyethylene,” J. Polym Sei., Polym. Symp., No. 4, 15–53 (1974).
Y. Fukui, T. Sato, M. Ushirokava, T. Asada, and S. Onogi, “Rheooptical studies of high polymers. XVII. Time-temperature superposition of time-dependent birefringence for high-density polyethylene,” J. Polym. Sci., Part A-2, 8, No. 7, 1195–1209 (1970).
I. M. Ward and M. A. Wilding, “Creep behavior of ultra-high modulus polyethylene: Influence of draw ratio and polymer composition,” J. Polym. Sci., Polym. Phys. Ed., 22, No. 4, 561–575 (1984).
J. M. Hutchinson, N. G. McCrum, and D. L. Pierce, “Study of the mechanism of creep recovery by T-jump technique,” J. Polym. Sci., Polym. Phys. Ed., No. 6, 1255–1258 (1974).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 4, pp. 616–622, July–August, 1991.
Rights and permissions
About this article
Cite this article
Boiko, Y.M., Kovriga, V.V. A generalized description of the strain properties of self-reinforced polyethylene. Mech Compos Mater 27, 392–397 (1992). https://doi.org/10.1007/BF00613566
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00613566