Literature cited
V. A. Kalinichev and M. S. Makarov, Wound Fiberglasses [in Russian], Moscow (1986).
D. V. Rosato and C. S. Grove, Winding with Glass Filament [Russian translation], Moscow (1969).
A. L. Abibov, B. V. Boitsov, G. A. Molodtsov, and I. Yu. Sheideman, Use of Structural Plastics in Aircraft Production [in Russian], Moscow (1971).
V. I. Dreitser, M. Z. Kanovich, and S. L. Rozinskii, “Effect of production factors on the strength of unidirectional fiberglasses in compression and shear,” Mekh. Polim., No. 3, 436–441 (1974).
E. F. Kharchenko, V. D. Protasov, A. A. Filipenko, and V. L. Polyakov, “Investigation of the mechanism responsible for the influence of the tensioning of a fibrous filler on the structure and strength of wound fiberglasses,” Mekh. Polim., No. 3, 439–444 (1977).
S. L. Roginskii, M. Z. Kanovich, and M. A. Koltunov, High-Strength Fiberglasses [in Russian], Moscow (1979).
V. I. Al'perin, N. V. Korol'kov, A. V. Motavkin, S. L. Roginskii, and V. A. Teleshov, Structural Fiberglasses [in Russian], Moscow (1979).
I. M. Bulanov, “Application of the theory of experiment planning to search for the best conditions for the production of unidirectional fiberglass,” in: Collection of Proceedings of the N. É. Bauman Moscow Advanced Technical School, Series on the Use of Plastics in Machine Building, No. 16 [in Russian], Moscow (1978), pp. 58–66.
A. S. Andreev, K. E. Perepelkin, and S. G. Slavinskii, “Some peculiarities of the properties of microplastics based on chemical reinforcing fibers,” Mekh. Kompozitn. Mater., No. 2, 195–200 (1980).
I. M. Bulanov, A. K. Dobrovolk'skii, and E. F. Kharchenko, ” Optimizing the procedure for the manufacture of articles formed from organoplastic on the basis of structural parameters,” in: Collection of the N. É. Bauman Moscow Advanced Technical School, Series on the Use of Plastics in Machine Building, No. 18 [in Russian], Moscow (1981), pp. 87–91.
G. M. Gunyaev, Structure and Properties of Polymeric Fibrous Composites [in Russian], Moscow (1981).
G. D. Andreevskaya, High-Strength Oriented Fiberglasses [in Russian], Moscow (1966).
N. G. Egorov and S. L. Roginskii, “Effect of filler content on the strength and deformability of unidirectional fiberglasses,” Plast. Massy., No. 7, 49–50 (1965).
É. S. Zelenskii, “High-strength and high-modulus reinforced plastics,” Usp. Khim.,L3, No. 2, 290–308 (1984).
S. P. Yakunin, L. A. Egorov, and A. A. Tyurin, “Effect of production molding regimes on the mechanical and structural properties of organoplastic produced by winding,” Mekh. Kompozitn. Mater., No. 4, 669–675 (1988).
G. M. Gunyaev, L. P. Kobets, and G. G. Zaitsev, “Determination of the mechanical properties of carbon fibers from the results of tests on carbon-fiber-reinforced plastics,” Probl. Prochn., No. 8, 36–40 (1976).
M. G. Kamenskii and Yu. M. Molchanov, “Use of the method of thermogravimetric analysis to determine the content of components in organoplastics,” Mekh. Kompozitn. Mater., No. 2, 332–336 (1981).
A. O. Udris and Z. T. Upitis, “Experimental investigation of the elastic and strength properties of epoxide binder ÉDT-10 in a complex stressed state,” Mekh. Kompozitn. Mater., No. 6, 972–978 (1988).
R. D. Maksimov, É. Z. Plume, and E. A. Sokolov, “Elasticity of high-strength organic fiber and organoplastic,” Mekh. Kompozitn. Mater., No. 2, 211–220 (1980).
V. G. Makarov, “Effect of porosity on the strength of fiberglasses,” Mekh. Kompozitn. Mater., No. 4, 729–730 (1982).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 3, pp. 528–536, May–June, 1990.
Rights and permissions
About this article
Cite this article
Meshkov, E.V., Kulik, V.I., Nilov, A.S. et al. Effect of production factors on the mechanical characteristics of a unidirectional organoplastic. Mech Compos Mater 26, 398–405 (1990). https://doi.org/10.1007/BF00613121
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00613121