Literature cited
S. T. Mileiko and Yu. N. Rabotnov, “Mechanics of fiber composites,” Usp. Mekh.,3, No. 1, 3–25 (1980).
J. M. Hedgepeth and P. Van Dyke, “Local stress concentration in imperfect filamentary composite materials,” J. Compos. Mater.,1, 294–309 (1967).
J. G. Goree and R. S. Gross, “Analysis of a unidirectional composite containing broken fibers and matrix damage,” Eng. Fract. Mech.,13, No. 3, 563–578 (1980).
L. R. Dharani, W. F. Jones, and J. G. Goree, “Mathematical modeling of damage in unidirectional composites,” Eng. Fract. Mech.,17, No. 6, 555–574 (1983).
A. M. Mikhailov, “Fracture of a unidirectional glass-plastic,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 5, 131–139 (1973).
Y. Korczynskij, S. J. Harris, and J. G. Morley, “The influence of reinforcing fibers on the growth of cracks in brittle matrix composites,” J. Mater. Sci.,16, 1533–1547 (1981).
D. J. Hannant, D. C. Hudges, and A. Kelly, “Toughening of cement and other brittle solids with fibres,” Philos. Trans. R. Soc.,A310, 175–190 (1983).
A. P. S. Selvadurai, “Concentrated body force loading of an elastically bridged penny-shaped flaw in a unidirectional fibre reinforced composite,” Int. J. Fract.,21, No. 2, 149–159 (1983).
B. Budianski, J. W. Hutchinson, and A. G. Evans, “Matrix fracture in fiber-reinforced ceramics,” J. Mech. Phys. Solids,34, No. 2, 167–189 (1986).
H. Stang, “A double inclusion model for microcrack arrest in fibre-reinforced brittle materials,” J. Mech. Phys. Solids,35, No. 3, 325–342 (1987).
V. M. Entov and R. L. Salganik, “Toward a Prandtl model of brittle fracture,” Inzh. Zh. Mekh. Tverd. Tela, No. 6, 87–99 (1968).
J. Tirosh, “The effect of plasticity and crack blunting on the stress distribution in orthotropic composite materials,” J. Appl. Mech.,40, No. 3, 785–790 (1973).
G. M. Newaz and J.-Y. Yung, “Modelling split crack growth behavior in a unidirectional composite under fatigue load,” Eng. Fract. Mech.,29, No. 4, 483–495 (1988).
S. G. Lekhnitskii, Theory of Fatigue of Anisotropic Bodies [in Russian], Moscow (1977).
Composite Materials (Handbook) [in Russian], Kiev (1985).
G. A. Cooper and A. Kelly, “Tensile properties of fibre-reinforced metals: fracture mechanics,” J. Mech. Phys. Solids,15, No. 4, 279–297 (1967).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 2, pp. 237–247, March–April, 1990.
Rights and permissions
About this article
Cite this article
Kobelev, V.V., Rikhter, A.A. Pull-out of fibers from the matrix on the surface of a crack in a composite. Mech Compos Mater 26, 188–197 (1990). https://doi.org/10.1007/BF00612318
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF00612318