Conclusions
Simulation of the process of nonlinear deformation and failure in the structure of a unidirectional epoxy glass plastic under transverse loading has indicated that equilibrium regions of failure receiving only hydrostatic compressive loading may form. The development of this region explains the high (up to 40%) nonlinearity of deformation diagrams under transverse biaxial compressive loading. The regions of nonlinear deformation of the epoxy matrix affect less markedly the nonlinearity of the macroscopic s∼ɛ* diagrams. This fact and also the formation and avalanchelike propagation of regions of complete failure explain the linear form of many diagrams corresponding to tensile and shear loading in the transverse plane. The relations of the nonlinear theory of elasticity make it possible to describe with sufficient accuracy the entire set of the calculated diagrams.
Similar content being viewed by others
Literature cited
S. D. Polkov and P. P. Staprov, Statistic Mechanics of Composite Materials [in Russian], Belorussian State University, Minsk (1978).
L. P. Khoroshun and B. P. Maslov, Methods of Automated Calculation of the Physicomechanical Constants of Composite Materials [in Russian], Naukova Dumka, Kiev (1980).
T. D. Shermergor, Theory of Elasticity of Microheterogeneous Media [in Russian], Nauka, Moscow (1977).
Yu. V. Sokolkin and A. A. Tashkinov, Mechanics of Deformation and Failure of Structural Heterogeneous Bodies [in Russian], Nauka, Moscow (1984).
N. S. Vakhvalov and G. P. Panasenko, Averaging of Processes in Periodic Media [in Russian], Nauka, Moscow (1984).
G. A. Vanin, Micromechanics of Composite Materials [in Russian], Naukova Dumka, Kiev (1985).
B. E. Pobedrya, Mechanics of Composite Materials [in Russian], Moscow State Univ., Moscow (1984).
A. M. Skudra and F. Ya. Bulavs, Structural Theory of Reinforced Plastics [in Russian], Zinatne, Riga (1978).
A. N. Anoshkin, Yu. V. Sokolkin, and A. A. Tashkinov, "Fields of microstresses and mechanical properties of disordered fiber-reinforced composites," Mekh. Kompozitn. Mater., No. 5, 860–865 (1990).
A. N. Anoshkin, "An algorithm of solving a stochastic problem of micromechanics in realizations," in: Reliability and Elastic Deformation of Structures [in Russian], Kuibyshev (1990), pp. 123–128.
I. V. Grushetskii, I. P. Dmitrienko, A. F. Ermolenko, et al., Failure of Structures and Composite Materials [in Russian, Edited by V. P. Tamuzh and V. D. Protasov], Zinatne, Riga (1986).
A. O. Udris and Z.T. Upitis, "Experimental examination of the elastic and strength properties of ÉDT-10 epoxy binder in the conditions of the multiaxial stress state", Mekh. Kompozitn. Mater., No. 6, 972–978 (1988).
R. B. Rikards and A. K. Chate, "Initial surface of the strength of a unidirectional reinforced composite in the plane stress state", Mekh. Polim., No. 4, 635–639 (1976).
Yu. G. Melbardis and A. F. Kregers, "Determination of the parameters of several types of physically nonlinear anisotropic materials", Mekh. Kompozitn. Mater., No. 6, 984–994 (1980).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, Vol. 29, No. 5, pp. 621–628, September–October, 1993.
Translated from Mekhanika Kompozitnykh Materialov, Vol. 29, No. 5, pp. 621–628, September–October, 1993.
Rights and permissions
About this article
Cite this article
Anoshkin, A.N., Sokolkin, Y.V. & Tashkinov, A.A. Inelastic deformation and fracture of disordered fiber-reinforced composites. Mech Compos Mater 29, 458–463 (1994). https://doi.org/10.1007/BF00611948
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00611948