Conclusions
-
1.
It was shown that the edge effect has an insubstantial influence on the elastic and strength properties of the investigated specimens in shear. This makes it possible to carry out experimental work with comparatively narrow specimens with width b = 12 mm.
-
2.
In the determination of the elastic and strength properties of laminated composites in shear it is necessary to take into account the influence of the scale effect (increased area of the loaded section at the expense of the thickness of the specimen).
-
3.
Study of the sequence and dispersity of stacking the monolayers in the stack showed that highly disperse arrangements of reinforcement are preferable. For the determination of the properties of a monolayer, a specimen with the greatest dispersity of stacking of the monolayers in the stack should be used.
-
4.
For all the composites under consideration the dependences τ12 = f(γ) were substantially nonlinear.
Similar content being viewed by others
Literature cited
Ch. V. Bert, “Mechanical tests of composites,” in: Analysis and Planning of Structures, Vol. 8, Issue 2, Moscow (1978), pp. 81–138.
Yu. M. Tarnopol'skii and T. Ya. Kintsis, “Methods of shear tests of composites,” Mekh. Kompozit. Mater., No. 3, 527–541 (1981).
B. I. Panshin, A. P. Kotova, and O. V. Kolchev, “Methods of determining the mechanical characteristics of sheet materials in shear in the plane of the sheet,” Zavod. Lab.,36, No. 11, 1371–1374 (1970).
G. Terry, “A comparative investigation of some methods of unidirectional in-plane shear characteristics of composite materials,” Composites,10, No. 4, 233–237 (1979).
J. M. Whitney, D. L. Stansbarger, and H. B. Plowell, “Analysis of the real shear test,” J. Compos. Mater.,5, No. 1, 24–34 (1971).
D. F. Sima, “In-plane shear stress-strain response of unidirectional composite materials,” J. Composite Materials,7, No. 1, 124–128 (1973).
A. Feldman, J. Tasi, and D. A. Stany, “Experimental determination of stiffness properties of thin-shell composite cylinders,” Exp. Mech.,8, No. 5, 385–394 (1966).
G. A. Kretsis, “A review of the tensile, compressive, flexural and shear properties of hybrid fibre-reinforced plastics,” Composites,18, No. 1, 16–23 (1987).
C. C. Chiao, R. L. Moore, and T. T. Chiao, “Measurement of shear properties of fibre composites. Pt. 1. Evaluation of test methods,” Composites,8, No. 3, 161–169 (1977).
K. Garcia, “An experimental and analytical investigation of the rail shear-test method as applied to composite materials,” Exp. Mech.,20, No. 8, 273–279 (1980).
I. G. Zhigun, V. A. Yakushin, V. V. Tanevskii, and V. V. Mikhailov, “Analysis of some methods of determining shear moduli,” Mekh. Polim., No. 1, 133–140 (1976).
D. E. Walratli and D. D. Adams, “The losipesku shear test as applied to composite materials,” Exp. Mech.,23, 105–110 (1983).
J. A. Barnes, M. Kumosa, and D. Hull, “Theoretical and experimental evaluation of the Iosipesku shear test,” Compos. Sci. Technol.,28, No. 4, 251–263 (1987).
P. H. Petit, “A simplified method of determining the in-plane shear stress response of unidirectional composites,” in: ASTM STP 460, Philadelphia, Pa. (1969).
S. W. Fowser, R. B. Pipes, and D. W. Wilson, “On the determination of laminate and lamina shear response by tension tests,” Compos. Sci. Technol.,26, No. 1, 31–36 (1986).
N. J. Pagano and J. C. Halpin, “Influence of end constraint in the testing of anisotropic bodies,” J. Compos. Mater.,2, No. 1, 18–33 (1968).
R. B. Pipes and N. J. Pagano, “Interlasinar stresses in composite laminates under uniform axial extension,” J. Compos. Mater.,4, No. 4, 538–543 (1970).
Yu. M. Tarnopol'skii and T. Ya. Kintsis, Static Test Methods of Reinforced Plastics [in Russian], 3rd ed., Moscow (1981).
C. T. Herakovich, “The influence of layer thickness on the strength of angle-ply laminates,” J. Composite Materials,16, No. 3, 216–227 (1982).
C. T. Herakovich, “On the relationship between engineering properties and delamination of composite laminates,” J. Compos. Mater.,15, No. 3, 336–348 (1981).
V. A. Polyakov, I. G. Zhigun, and V. V. Khitrov, “Evaluation of stresses in the zone of the edge effect in the extension of laminated composites,” Mekh. Kompozit. Mater., No. 5, 787–796 (1987).
A. K. Malmeister, V. P. Tamuzh, and G. A. Teters, Resistance of Stiff Polymer Materials [in Russian], Riga (1980).
P. W. Hsu and C. T. Herakovich, “Edge effects in angle-ply composite materials,” J. Compos. Mater.,11, No. 4, 422–428 (1974).
S. A. Tang, “A boundary layer theory. Pt. 1. Laminated composites in plane stress,” J. Compos. Mater.,9, No. 1, 33–41 (1975).
P. Lagace, I. Brewer, and C. Kassapoglau, “The effect of thickness on interlaminar stresses and delamination in straight-edged laminates,” J. Compos. Technol. Res.,9, No. 3, 81–87 (1987).
C. E. Harris and D. H. Morris, “A damage tolerant design for graphite/epoxy laminated composites,” J. Compos. Technol. Res.,7, No. 3, 77–81 (1985).
D. L. Flaggs and M. N. Rural, “Transverse lamina strength in graphite-epoxy laminates,” J. Compos. Mater.,16, No. 2, 103–116 (1982).
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 4, pp. 710–717, July–August, 1989
Rights and permissions
About this article
Cite this article
Perov, Y.Y., Lokshin, V.A. & Lyapina, N.V. Investigation of the elastic and strength characteristics of laminated plastics in shear. Mech Compos Mater 25, 534–542 (1990). https://doi.org/10.1007/BF00610709
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00610709