Literature cited
G. L. Koren'kov, E. P. Nikulina, L. S. Tverskaya, T. S. Fedorovskaya, V. N. Filichkina, V. A. Mytsul, G. V. Grozdova, and L. V. Osipova, “Present state and prospects for development of the production and use of fillers and filled plastics in the capitalist world,” Khim. Prom-st' Rubezhom, No. 1, 1–103 (1982).
I. N. Frolova, A. I. Zharov, A. I. Chechik, and P. Yu. Ignatov, “Investigation of the processing technology for highly filled materials of the “Norplast” type,” in: Proc. All-Union Sci.-Tech. Conf. on Highly Filled Composite Polymeric Materials, Their Production and Use in the National Economy [in Russian], Moscow (1982), pp. 86–87.
E. N. Shchupak, V. A. Tochin, and V. V. Tumanov, “Physicomechanical characteristics of compositions based on HDPE as a function of the method of preparing the specimens,” in: Proc. All-Union Sci.-Tech. Conf. on Highly Filled Composite Polymeric Materials, Their Production and Use in the National Economy [in Russian], Moscow (1982), pp. 85–86.
B. L. Tsetlin, L. P. Yanova, G. K. Sibirskaya, and P. A. Rebinder, “Properties of graphic-filled plastics and the high-filling effect,” Dokl. Akad. Nauk SSSR,114, No. 1, 146–149 (1957).
V. P. Solomko, Filled Crystalline Polymers [in Russian], Kiev (1980).
E. G. Howard, B. L. Glazar, and J. W. Collete, “Homogeneous composites of ultrahigh molecular weight polyethylene and minerals. 2. Properties,” Ind. Eng. Chem. Prod. Res. Dev.,20, 429–433 (1981).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 4, pp. 635–639, July–August, 1984.
Rights and permissions
About this article
Cite this article
Tochin, V.A., Shchupak, E.N., Tumanov, V.V. et al. Concentration dependence of the deformation characteristics of high-density polyethylene compositions with dispersed fillers. Mech Compos Mater 20, 440–443 (1985). https://doi.org/10.1007/BF00609642
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00609642