Literature cited
Yu. M. Tamopol'skii and G. G. Portnov, “The pressure-molding process for fiberglass components,” Plast. Massy, No. 11, 19–23 (1963).
M. S. Makarov and Yu. V. Kazankov, Production of Fiberglass Articles [in Russian], Moscow (1973).
V. G. Dedyukhin and V. P. Stavrov, Pressworked Fiberglasses [in Russian], Moscow (1976).
A. Kaminskii, “Effect of molding pressure on properties of laminar plastics strengthened by glass fiber,” Plast. Massy, No. 5, 55–56 (1980).
G. Menges and G. Wöhrmann, “Methoden zur überwachung des pressvorganges beim verpressen von harzmatten,” Plasverarbeiter,25, No. 5, 286–291 (1974).
V. V. Bolotin, “Theory of production Stresses in composite materials,” in: Composite Materials. Reports of the First Soviet-Japanese Symposium on Composite Materials [in Russian], Moscow (1979), pp. 268–273.
V. V, Bolotin and Yu. N. Novichkov, Mechanics of Multilayer Designs [in Russian], Moscow (1980).
A. N. Vorontsov and V. B. Antokhonov, “Problem of the molding of laminar-composite plates by direct pressing,” Mekh. Kompozitn. Mater., No. 5, 928–931 (1981).
V. V. Bolotin, “Theory of viscoelasticity for structurally unstable materials,” in: Proceedings of the Moscow Power Engineering Institute. Dynamics and Strength of Machinery [in Russian], No. 101 (1972), pp. 31–35.
R. Kh. Murzakhanov, “On the filtration of a polymer binder during solidification,” Mekh. Polim., No. 4, 740–742 (1978).
V. V. Bolotin and K. S. Bolotina, “On the contraction of epoxy binders during solidification,” Mekh. Polim., No. 1, 178–181 (1972).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 6, pp. 1034–1042, November–December, 1982.
Rights and permissions
About this article
Cite this article
Bolotin, V.V., Vorontsov, A.N. & Antokhonov, V.B. Theory of the pressure molding of articles of composite materials. Mech Compos Mater 18, 696–703 (1983). https://doi.org/10.1007/BF00604152
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00604152