Literature cited
M. Ya. Levandovskii and G. V. Toporov, “A method of investigating the resistance of steels of residual deformation and contact failure under impact cyclic loadings,” Zavod. Lab.,34, No. 12, 1498–1501 (1968).
F. F. Leng, “Failure of composites with disperse particles in a brittle matrix,” in: Composition Materials [in Russian], Vol. 5, Failure and Fatigue, Moscow (1978), pp. 11–57.
F. R. Eurich and T. L. Smith, “Molecular-mechanical aspects of the isothermal failure of elastomers,” in: Failure, Vol. 7, Failure of Nonmetallic and Composition Materials, Part 2 [Russian translation], Moscow (1976), pp. 104–390.
V. E. Gul', “Interrelation between the structure and properties of polymers,” in: Interrelation between the Structure and Properties of Polymers [in Russian], Moscow (1975), pp. 29–57.
Ya. I. Frenkel', “Surface phenomena,” in: Kinetic Theory of Fluids [in Russian], Leningrad (1975), pp. 351–408.
N. I. Moskvitin, “Molecular mechanisms of the adhesion, autohesion, and cohesion of solids,” in: Physicochemical Bases of Cementing and Adhesion Processes [in Russian], Moscow (1974), pp. 6–29.
A. A. Berlin and V. E. Basin, “The thermodynamic treatment of adhesion phenomena,” in: Fundamentals of Polymer Adhesion [in Russian], Moscow (1974), pp. 52–85.
Yu. S. Maloshchuk, V. Ya. Kiselev, and S. S. Voyutskii, “Effect of plasticizers on the adhesion of crystalline polymers to elastomers,” Plast. Massy, No. 12, 68–71 (1967).
V. G. Khozin, R. M. Sultanaev, and N. S. Prokhorova, “Characteristic features of the polychlordiphenyl modification of epoxy polymers,” Mekh. Polim., No. 2, 218–223 (1975).
L. Maskiya, “Additives for the modification of mechanical properties,” in: Additives for Plastics [in Russian], Moscow (1978), pp. 53–117.
N. S. Enikolopov, “Composition polymer materials,” Priroda, No. 8, 62–67 (1980).
N. I. Shishkin and M. F. Milagin, “Prerupture states of solid polymers. 2. Elastic limit and ultimate strength,” Mekh. Polim., No. 2, 195–201 (1976).
B. Rouzen, “Phenomenological investigation of the failure process of elastomers in the glassy state,” in: Failure of Solid Polymers [in Russian], Moscow (1971), pp. 235–285.
C. E. Feltner, “Cycle-dependent fracture of PMMA,” J. Appl. Phys.,9, 3576–3584 (1967).
S. T. Buglo and S. B. Ratner, “Effect of relaxation phenomena on the endurance of plastics under harmonic and impact loadings,” Mekh. Polim., No. 1, 165–168 (1972).
F. Bueche, “Tensile strength of plastics: effects of flaws and chain relaxation,” J. Appl. Phys., No. 8, 1231–1234 (1958).
V. A. Stepanov, Yu. A. Nikonov, L. A. Belyaeva, and A. S. Vlasov, “Causes of longevity reduction in polymers subjected to cyclic loading,” Mekh. Polim., No. 2, 279–283 (1976).
V. S. Postnikov, “The physics and chemistry of a surface,” in: Solid-State Physics and Chemistry [in Russian], Moscow (1978), pp. 440–478.
R. Becker, “The vapor pressure over a small drop,” in: Theory of Heat [Russian translation], Moscow (1974), pp. 95–100.
V. E. Gul', “Problems of the failure of polymer materials,” Mekh. Polim., No. 2, 195–199 (1975).
T. V. Shamraevskaya, M. V. Shchukin, and V. E. Gul', “The problem of estimating activation energy from temperature-rate dependencies of strength,” Mekh. Polim., No. 4, 591–596 (1976).
Author information
Authors and Affiliations
Additional information
Translated fron Mekhanika Kompozitnykh Materialov, No. 6, pp. 1008–1013, November–December, 1982.
Rights and permissions
About this article
Cite this article
Solomatov, V.I., Bobryshev, A.N. & Proshin, A.P. Effect of dimensional factors of a disperse filler on the strength of epoxy composites. Mech Compos Mater 18, 674–679 (1983). https://doi.org/10.1007/BF00604148
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00604148