Literature cited
B. Rozen, “Mechanics of composition hardening,” in: Fibrous Composite Materials [Russian translation], Moscow (1967), pp. 54–96.
A. Lawley and M. J. Kozak, “Effect of a surface of separation on the characteristics of a composite in the elastoplastic region,” in: Surfaces of Separation in Metallic Composites. Composition Materials [Russian translation], Vol. 1, Moscow (1978), pp. 231–265.
S. T. Mileiko and A. A. Khvostunkov, “Compression curve of a fibrous composite,” Zh. Prikl. Mekh. Tekh. Fiz., No. 4, 155–160 (1971).
H. Schuerch, “Prediction of compressive strength in uniaxial boron-fiber/metal-matrix composite materials,” AJAA,4, No. 1, 102–106 (1966).
O. M. Guz', “Pro viznachennaya teoretichnoi granits! mitsnosti pri stisku armovanikh materialiv,” Dop. Akad. Nauk Ukr. RSR, Ser. A, No. 3, 236–238 (1969).
A. N. Guz', “Formulation of the theory of stability of unidirectional fibrous materials,” Prikl. Mekh.,5, No. 2, 62–70 (1969).
I. Yu. Babich, A. N. Guz', and N. A. Shul'ga, “Investigation of the dynamics and stability of composite materials in a three-dimensional arrangement,” Prikl. Mekh.,18, No. 1, 3–27 (1982).
A. N. Guz', Stability of Three-Dimensional Deformable Solids [in Russian], Kiev (1971).
A. N. Guz', Fundamentals of the Theory of the Stability of Mine Excavations [in Russian], Kiev (1977).
A. N. Guz' and M. A. Cherevko, “Fracture mechanics of a fibrous composite material with an elastoplastic matrix under compression,” Dokl. Akad. Nauk SSSR,256, No. 4, 806–809 (1981).
A. A. Il'yushin, Plasticity. Part 1. Elastoplastic Deformations [in Russian], Moscow-Leningrad (1948).
A. I. Shinkar', A. B. Kitaigorodskli, and S. K. Borshchevskaya, “Solution of linear differential equations (a program written in FORTRAN),” in: Algorithms and Programs for the Solution of Problems of the Mechanics of a Solid Deformable Body [in Russian], Kiev (1976), pp. 157–170.
I. Yu. Babich, “On the stability of a fiber in a matrix subject to small deformations,” Prikl. Mekh.,9, No. 4, 29–35 (1973).
M. R. Pinnel and A. Lawley, “Correlation of uniaxial yielding and substructure in aluminumstainless steel composites,” Met. Trans.,1, No. 5, 1337–1348 (1970).
Industrial Deformable, Sintered, and Casting Aluminum Alloys (Reference Manual) [in Russian], Moscow (1972).
A. A. Babakov and M. V. Pridantsev, Corrosion-Resistant Steels and Alloys [in Russian], Moscow (1971).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 6, pp. 987–994, November–December, 1982.
Rights and permissions
About this article
Cite this article
Guz', A.N., Cherevko, M.A. Compression failure of a unidirectional fibrous composite with an elastoplastic matrix. Mech Compos Mater 18, 656–663 (1983). https://doi.org/10.1007/BF00604145
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00604145