This is a preview of subscription content, log in via an institution to check access.
Literature cited
I. V. Kragel'skii, M. N. Dobychin, and V. S. Kombalov, Principles of Calculation of Friction and Wear [in Russian], Moscow (1977).
G. Uétts, “Key findings of studies of abrasive erosion conducted at Stuttgart University,” Tr. Tallin. Politekh. Inst., Ser. A, No. 347, 3–21 (1973).
. R. Kleis, “On problems of determining erosive wear in impact with a stream of hard particles,” in: Theory of Friction and Wear and Problems of Standardization, Bryansk (1978), pp. 219–230.
V. I. Biryukov, V. N. Vinogradov, M. M. Martirosyan, and V. N. Mikhailychev, Abrasive Weat of Gas-Industry Equipment [in Russian], Moscow (1977).
. P. Cherepanov, Mechanics of Brittle Fracture [in Russian], Moscow (1974).
E. E. Styller and S. B. Ratner, “Wear by an oblique stream of hard particles,” Tr. Vses. Nauchno-Issled. Proekt.-Tekhnol. Inst. Ugle. Mashinostr., No. 20, 32–53 (1975).
. S. Penkin, Rubberized Machine Parts, Moscow (1977), pp. 62–108.
Sheldon, “Similarities and differences in the erosional behavior of materials,” Teoret. Osnovy Inzh. Raschetov, No. 3, 208–214 (1970).
Smeltzer, Gulden, Kompton, “Mechanisms of the erosion of metals in impact with dust particles,” Teoret. Osnovy Inzh. Raschetov, No. 3, 225–238 (1970).
G. Grant and W. Tabakoff, “Erosion prediction in turbomachinery due to environmental solid particles,” AIAA Pap., No. 16 (1974).
W. H. Jennings, W. J. Head, and C. R. Manning, “A mechanistic model for the prediction of ductile erosion,” Wear,40, No. 1, 93–112 (1976).
R. S. Saifullin, Composite Electrochemical Coatings and Materials, Moscow (1977).
G. M. Gunyaev, T. G. Sorina, V. N. Vladimirskii, and R. M. Kupriyanova, “Erosion-resistant coatings based on whiskers,” in: Aviatsionnye Materialy [in Russian], No. 2, Moscow (1977), pp. 40–45.
A. A. Antonov, “Method and some results of wear tests of steels and cast iron in an airabrasive stream,” Tr. Mosk. Inst. Neftekhim. Gazov. Promsti., No. 20, 79–95 (1961).
I. R. Kleis and Kh. Kh. Uuémyis, “New machines for studying abrasive erosion,” Vestn. Mashinostr., No. 9, 13–15 (1971).
I. R. Kleis and T. A. Pappel', “Investigation of the energy balance in the impact of an abrasive stream,” in: Wear of Materials in Impact with Hard Particles [in Russian], Moscow (1976), pp. 11–12.
H. Uetz and J. Fohl, “Wear as an energy transformation process,” Wear,49, No. 2, 253–264 (1978).
V. N. Kashcheev, “Laws of abrasive wear of metals and alloys,” in: Theory of Friction and Wear and Problems of Standardization, Bryansk (1978), pp. 181–192.
Kh. I. Kabral and R. K. Mozberg, “On the character of fracture of hard alloys in abrasive erosion,” Tr. Tallin. Politekh. Inst., Ser. A, No. 294, 17–22 (1970).
Kh. Uuémyis, I. Kleis, V. Tumanov, and T. Tiidiman, “Investigation of the abrasive erosion of sintered tungsten hard alloys,” Poroshk. Metall., No. 3, 98–101 (1974).
L. É. Val'dma, V. A. Kudryavtsev, and P. K. Kallas, “Effect of structure and mechanical properties of TiC-Ni-Co-Cr hard alloys on hydroabrasive wear,” in: Wear of Materials in Impact with Hard Particles [in Russian], Moscow (1976), pp. 46–48.
Viderkhorn, Fullerma, Bukovskii, and Robbins, “Effect of hydrothermal media on the erosion of refractory coatings,” Teoret. Osnovy Inzh. Raschetov, No. 2, 48–52 (1977).
G. V. Samsonov, A. A. Dan'kin, A. A. Markov, and I. V. Bogomol, “Strength and gas-abrasive wear resistance of cermets based on titanium carbide,” Mashinovedenie, No. 1, 88–93 (1978).
L. I. Pogodaev, A. I. Nekoz, and V. V. Ovcharenko, “Wear resistance of two-phase materials in impact with hard particles and cavitational wear,” in: Problems of Friction and Wear [in Russian], No. 8, Kiev (1975), pp. 18–21.
Springer, Yang, “Model of rain erosion of composite materials reinforced with fibers,” Raket. Tekh. Kosmonav.,13, No. 7, 45–53 (1973).
L. B. Greszczuk, “Response of istropic and composite materials to particle impact,” Am. Soc. Test. Mater., Spec. Tech. Publ., No. 568, 183–214 (1975).
G. M. Gunyaev, A. F. Rumyantsev, N. N. Fed'kova, G. P. Mashinskaya, N. P. Bardina, E. I. Stepanychev, and I. M. Makhmutov, “Polyfilament composite materials,” in: Aviation Materials [in Russian], No. 2, Moscow (1977), pp. 40–45.
V. I. Gundarov, T. D. Karimbaev, Yu. A. Nozhnitskii, and L. S. Rysin, “Experimental study of the erosion resistance of composite materials and the effectiveness of certain methods of protecting parts made of these materials from erosional wear,” in: Wear of Materials in Impact with Hard Particles [in Russian], Moscow (1976), p. 76.
A. Khasui, Technology of Metal Spray Coating, Moscow (1975).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 2, pp. 235–240, March–April, 1980.
Rights and permissions
About this article
Cite this article
Karimbaev, T.D., Nozhnitskii, Y.A., Gundarov, V.I. et al. Fracture and wear of composite materials in interaction with a stream of abrasive particles. Mech Compos Mater 16, 166–174 (1980). https://doi.org/10.1007/BF00603927
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00603927