Literature cited
S. A. Ambartsumyan, Theory of Anisotropic Plates, Moscow (1967).
A. L. Rabinovich and I. A. Verkhovskii, “On the elastic constants of oriented glass-plastics,” Inzh. Zh.,4, No. 1, 90–100 (1964).
A. F. Kreger and Yu. G. Melbardis, “Determination of the deformability of three-dimensionally-reinforced composites by the method of stiffness averaging,” Mekh. Polim., No. 1, 3–8 (1978).
I. F. Obraztsov, V. V. Vasil'ev, and V. L. Bunakov, Optimum Design of Shells of Composite Materials [in Russian], Moscow (1977).
P. C. Chou and J. Carleone, “Elastic constants of layered media,” J. Compos. Mater.,6, No. 1, 80–93 (1972).
V. D. Azzi and S. W. Tsai, “Elastic moduli of laminated anisotropic composites,” Exp. Mech., No. 6, 177–185 (1965).
R. B. Enie and R. R. Rizzo, “Three-dimensional laminate moduli,” J. Compos. Mater.,4, No. 1, 150–154 (1970).
K. Chamis, “Micromechanical theories of strength,” in: Composite Materials, Moscow (1978), pp. 106–165.
D. S. Abolin'sh, “Compliance tensor of a unidirectionally-reinforced elastic material,” Mekh. Polim., No. 4, 52–59 (1965).
A. M. Skudra, F. Ya. Bulavs, and K. A. Rotsens, Creep and Static Fatigue of Reinforced Plastics, Riga (1971).
L. B. Greshchuk, “Interfiber stresses in composite materials reinforced with fibers,” Raket. Tekh. Kosmonav.,9, No. 7, 76–84 (1971).
E.M. Uitni and M. V. Raili, “Elastic properties of fiber-reinforced composites,” Raket. Tekh. Kosmonav.,4, No. 9, 44–51 (1966).
G. A. Van Fo Fy, Structures of Reinforced Plastics, Kiev (1971).
F. Ya. Bulavs, Ya. V. Auzukalns, and A. M. Skudra, “Deformation characteristics of plastics reinforced with high-modulus anistropic fibers,” Mekh. Polim., No. 4, 631–639 (1972).
A. M. Skudra and É. Z. Plume, “Stresses in plastics reinforced with anisotropic fibers under transverse normal loading,” Mekh. Polim., No. 2, 244–252 (1973).
S. Kobayashi and T. Ishikawa, “Elastic properties of unidirectional fiber-reinforced composites,” Compos. Mater.,3, No. 3, 12–20 (1974).
A. K. Malmeister, V. P. Tamuzh, and G. A. Teters, Strength of Rigid Polymeric Materials, Riga (1972).
É. Z. Plume, “Strength of reinforced plastics in tension at an angle to the direction of reinforcement, “ Candidate's Dissertation, Engineering Sciences, Riga (1974).
B. W. Shaffer, “Elasto-plastic stress distribution within reinforced plastics loaded normal to its internal filaments,” AIAA J.,6, No. 12, 2316–2324 (1968).
V. L. Blagonadezhin, N. S. Mezentsev, V. D. Merkulov, and V. D. Polyakov, “Experimental study of the physicomechanical characteristics of an organocarbon plastic,” Tr. Mosk. Energ. Inst., No. 280, 43–46 (1976).
A. G. Adamovich, “Short-term deformation and long-term creep of organic filaments based on p-polyamides,” First Conference of Young Specialists on the Mechanics of Polymers. Summary of Reports, Riga (1977), pp. 36–38.
A. G. Adamovich, “Temperature—time dependence of the strength of organic filaments based on p-polyamides,” Mekh. Polim., No. 3, 470–473 (1978).
E. A. Sokolov and R. D. Maksimov, “Possibilities of predicting the creep of polymerfiber-reinforced plastics according to the properties of the components,” Mekh. Polim., No. 6, 1005–1012 (1978).
V. I. Smyslov, V. L. Polyakov, R. D. Maksimov, B. N. Anufriev, M. Kh. Shorshorov, R. A. Oganov, and E. A. Sokolov, “Anisotropy of the mechanical properties of composite textolites based on organic and inorganic fibers,” Mekh. Kompozitn. Mater., No. 1, 30–33 (1980).
A. F. Kregers, “Algorithm for finding the minimum of a function of many variables by the descent method,” Algoritmy i Programmy, No. 2, 9 (1974).
G. A. Teters, R. B. Rikards, and V. L. Narusberg, Optimization of Shells of Laminated Plastics, Riga (1978).
A. K. Rath and P. K. Sinha, “Evaluation of stiffness coefficient for fiber-reinforced laminated composites,” Fiber Sci. Technol.,7, No. 3, 185–198 (1974).
Yu. N. Rabotnov, “Strength of Layered Composites,” Izv. Akad. Nauk SSSR, Mekh. Tverd. Tela, No. 1, 113–119 (1979).
V. P. Tamuzh and G. A. Teters, “Problems of the mechanics of composite materials,” Mekh. Kompozitn. Mater., No. 1, 34–45 (1979).
I. G. Zhigun and V. A. Polyakov, Properties of Three-Dimensionally Reinforced Plastics [in Russian], Riga (1978).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 2, pp. 211–220, March–April, 1980
Rights and permissions
About this article
Cite this article
Maksimov, R.D., Plume, É.Z. & Sokolov, E.A. Elasticity of high-strength organic fiber and organoplastic. Mech Compos Mater 16, 144–153 (1980). https://doi.org/10.1007/BF00603924
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00603924