Conclusions
-
1.
Investigations were conducted to determine the critical value of the ratio of the dimensions of the core and the cross sectional area of the specimens of the highly filled composite of the polymer beton type α = 0.1. When this critical value is reached, the ultimate strength and elasticity modulus decrease. At α ⩽ 0.1, these parameters remain unchanged.
-
2.
It has been established that the Young's moduli in tensile and compressive loading of the polymer binder based on the FA monomer are equal irrespective of the hardening conditions.
-
3.
The results show that the preliminary loading of the polymer binder of the highfilled composite of the polymer beton type reduces the elasticity modulus of the binder.
Similar content being viewed by others
Literature cited
A. V. Belov,“Examination of the effect of liquid corrosive media on the variation of the physicomechanical properties of compositions based on thermoreactive resins,”Dissertation for the Title of Candidate of Technical Sciences, Moscow (1970).
V. M. Ershov, A. A. Zaripov, V. G. Khozin, and R. Z. Rakhimov,“Examination of the properties of new furane binder FAFP-5,”in: Nauchn. Tr. Saratov, Politekhn. Inst., No. 70, 91–95 (1974).
A. M. Zhukov and N. A. Zhigunova,“Examination of the properties of a defect-free binder, mastic, and polymer beton based on the FA monomer,”in: Proceedings of the All-Union Conference on Composite Materials [in Russian], No. 2, Moscow (1981), pp. 203–205.
R. O. Krasnovskii, M. S. Yudin, and M. B. Kazatskii,“A two-component strain gauge meter for measuring the strains in beton specimens,”in: Tr. VNIIFTRI, No. 41 (71), Moscow (1979), pp. 65–71.
A. M. Zhukov and O. M. Kochin,“Unstressing plastically deformed alloy D-16,”in: Tr. VNIIFTRI, No. 88 (38), Moscow (1971), pp. 113–124.
A. M. Zhukov,“Deformation of low-carbon steel at fixed loading rates,”Probl. Prochn., No. 12, 26–30 (1974).
A. M. Zhukov,“Deformation of epoxy binder ÉDT-10 in pure compression conditions,”in: Strength Calculations [in Russian], No. 20, Moscow (1979), pp. 152–159.
A. G. Krupichka,“Examination of polymer beton structures taking into account the moisture content of the medium,”Dissertation for the Title of the Candidate of Technical Sciences, Moscow (1980).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 4, pp. 619–623, July–August, 1983.
Rights and permissions
About this article
Cite this article
Zhugunova, N.A., Zhukov, A.M., Grinberg, S.M. et al. Examination of the mechanical properties of a highly filled composite based on a furfurol acetone binder. Mech Compos Mater 19, 449–453 (1984). https://doi.org/10.1007/BF00603902
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00603902