Summary
The reduction in hygroscopicity as spruce wood is impregnated with linseed oil may be accounted for using a molecular exclusion model. On the basis of the model, each linseed oil molecule appears to displace 90 water molecules and occupy 6 hydrogen bonding sites in the wood.
Similar content being viewed by others
References
Adamson, A. W. 1967. Physical chemistry of surfaces. Interscience, N. Y.
Schneider, M. H. 1972. Wood-coating interactions—a review. J. Paint Technology. 44: 108–110
Schneider, M. H. 1978. Wood-Linseed oil interactions. Ph. D. thesis, SUNY College of Environmental Science and Forestry, Syracuse, N. Y.
Swern, D. 1964. Composition and characteristics of industrial fats and oils. Ch. 6: In: Bailey's Industrial Oil and Fat Products, D. Swern ed., Interscience, N. Y.
Weast, W. C. 1978. Handbook of chemistry and physics. The Chemical Rubber Pub. Co., West Palm Beach, Fla.
Wink, W. A., Sears, G. R. 1950. Equilibrium relative humidities above saturated solutions at various temperatures. Tappi (9): 96A–99A
Author information
Authors and Affiliations
Additional information
Dr. Allen R. Sharp, Associate Professor of Physics at the University of New Brunswick and Dr. Christen Skaar, Professor of Wood Physics at Virginia Polytechnic Institute and State University freely gave essential advice and encouragement during this work. Graphical depiction of the molecular displacement model (Fig. 1) was suggested by Dr. Skaar. Much of the experimental work was carried out by Mr. Wu-Rong Perng, Scientific Technician in Wood Science and Mrs. Monica Snow, Instructor in Wood Science at the University of New Brunswick
Rights and permissions
About this article
Cite this article
Schneider, M.H. Hygroscopicity of wood impregnated with linseed oil. Wood Sci.Technol. 14, 107–114 (1980). https://doi.org/10.1007/BF00584040
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00584040