Abstract
Beryllium foil is important for a number of aerospace applications including honeycomb structures and metal-matrix composites. In this study, a method of producjng beryllium foil directly from powder or flake is demonstrated. A variety of foils were produced in the thickness range 90–300 μm, free from defects such as pinholes and excessive surface roughness, and exhibiting sufficient formability for honeycomb manufacture. Foil produced directly from powder or flake exhibits crystallographic texture, microstructure, and formability equivalent to foil produced from more massive precursors.
Similar content being viewed by others
References
E. D. Levine, D. F. Kaufman and L. R. Aronin, Trans. AIME 230 (1964) 260.
G. L. Tuer and A. R. Kaufmann, in “The Metal Beryllium” edited by D. W. White and J. E. Burke (The American Society for Metals, Cleveland, OH, 1955) pp. 372–424.
P. I. Treharne and A. Moore, J. Less Common Metals 4 (1962) 275.
G. I. Taylor, J. Inst. Metals 62 (1936) 307.
G. J. London, V. V. Damiano and H. Conrad, Trans. AIME 242 (1968) 979.
H. J. Saxton and G. J. London, in “Beryllium Science and Technology”, Vol 1, edited by D. Webster and G. J. London (Plenum Press, New York, NY, 1979) pp. 115–44.
V. V. Damiano, G. J. London, D. F. Kaufman and L. R. Aronin, Trans. AIME 242 (1968) 2423.
J. L. Klein, V. G. Macres, D. H. Woodward and J. Greenspan, in “The Metal Beryllium”, edited by D. W. White and J. E. Burke (The American Society for Metals, Cleveland, OH, 1955), pp. 425–65.
F. M. Yans, A. D. Donaldson and A. R. Kaufmann, Trans. AIME 221 (1961) 364.
J. C. Bomberger, US Pat. no. 3150 436, September 1964.
J. W. Noble, H. S. Orr and Frank R. Romeo, US Pat. no. 3164 884, January 1965.
J. Wittenauer and B. Walser, Mater. Sci. Engng A 123 (1990) 45.
O. T. Rashevitz, V. S. Fedyakina, A. I. Vovsi, N. S. Kashpur, Y. B. Ulanovsky and E. V. Yadin, in “Titanium and Titanium Alloys”, Proceedings 3rd International Conference, edited by J. C. Williams and A. F. Belov (Plenum Press, New York, 1982), pp. 2437–43.
K. D. Kennedy and M. E. Turner, US Pat. no. 3729 046, April 1973.
J. L. Hughes, Metals Engng Q. 14 (1) (1974) 1.
T. G. Nieh and J. Wadsworth, Thin Solid Films, 152 (1987) 525.
J. W. Patten and E. D. McClanahan, J. Appl. Phys. 43 (1972) 4811.
R. Blickensderfer, Adv. Mater. Proc. Met. Prog. 134 (10) (1988) 47.
A. V. Krupin, Y. N. Chernyshev, Y. M. Sigalov and Y. P. Vorobyov, in “Titanium and Titanium Alloys”, Proceedings 3rd International Conference, edited by J. C. Williams and A. F. Belov (Plenum Press, New York, 1982) pp. 263–72.
A. Middlemiss, D. Hague and M. C. Gleave, Met. Technol. 9 (1982) 413.
J. J. Valencia, C. McCullough, C. G. Levi and R. Mehrabian, Scripta Metall. 21 (1987) 1341–6.
T. Gaspar, L. E. Hackman, Y. Sahai, W. A. T. Clark and J. Wood, Proc. Mater. Res. Soc. Symp. 58 (1986) 23.
D. H. Ro, M. W. Toaz and V. S. Moxson, J. Metals 35 (1) (1983) 34.
D. H. Ro and M. W. Toaz, Met. Powder Rep. 40 (1985) 333.
W. W. Leslie, in “Beryllium Science and Technology”, Vol. 2, edited by D. R. Floyd and J. N. Lowe (Plenum Press, New York, NY, 1979) pp. 57–66.
C. S. Barrett and T. B. Massalski, in “Structure of Metals”, 3rd Edn (McGraw-Hill, Reading, MA, 1966) pp. 200–4.
D. B. Cullity, in “Elements of X-ray Diffraction”, 2nd Edn (Addison-Wesley, 1978) pp. 303–16.
J. Wittenauer and B. Norris, J. Metals 42 (3) (1990) 36.
A. R. Kaufman, P. Gordon and D. W. Lillie, Trans. Amer. Soc. Metals 42 (1950) 785.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wittenauer, J., Nieh, T.G. & Waychunas, G. Characterization of beryllium foil produced by hot rolling. J Mater Sci 27, 2653–2659 (1992). https://doi.org/10.1007/BF00540685
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00540685