Summary
Thick rectangular plates are investigated using the method of initial functions proposed by Vlasov. The governing equations are derived from the three-dimensional elasticity equations using a MacLaurin series approach. As the governing equations can be obtained in the form of series, approximate theories of any desired order can be constructed easily by proper truncation. An exact solution is obtained for an allround simply supported thick plate using a Navier type solution. A Levy type solution for higher order theories is illustrated for the case of a thick plate with two opposite edges simply supported and other two edges clamped. Numerical results obtained are compared with those of classical, Reissner and Srinivas et al. solutions.
Übersicht
Mit Hilfe der Methode der Initial-Funktionen von Vlasov werden rechteckige Platten untersucht. Die zugehörigen Gleichungen werden aus den Gleichungen für das dreidimensionale Problem durch eine Entwicklung in MacLaurin-Reihen gewonnen. Durch Abbrechen dieser Reihen können Näherungen beliebiger Ordnung erhalten werden. Für den Fall einer allseitig einfach gelagerten dicken Platte wird eine exakte Lösung erhalten, bei der eine Lösung vom Navier-Typ verwendet wird. Eine Lösung vom Levy-Typ höherer Ordnung wird am Beispiel einer dicken Platte abgeleitet, von der zwei gegenüberliegende Ecken einfach gelagert, die anderen fest eingespannt sind. Die numerischen Ergebnisse werden mit den klassischen, von Reissner, Srinivas u. a. erhaltenen Resultaten verglichen.
Similar content being viewed by others
Literatur
Reissner, E.: The effect of transverse shear deformation on the bending of elastic plates. J Appl. Mech; 12 (1945) p. A69
Kromm, A.:Über die Randquerkräfte bei gestützten Platten. Z. Angew. Math. Mech. 35 (1955) p. 231
Marguerre, K., Woernle, H. T.: Elastic plates. Waltham, Mass., Toronto, London 1969
Green, A. E.: On Reissner's theory of bending of elastic plates. Quart. Appl. Math. 7 (1949) p. 223
Donnell, L. H.: A theory for thick plates. Proc. 2nd U.S. Nat. Cong. Appl. Mech. 1954 P. 369
Lee, C. W.: Three dimensional solution for simply supported thick rectangular plates. Nuclear Engng. Design 6 (1967) p. 155
Friedrichs, K. O., Dressler, R. F.: A boundary layer theory for elastic plates. Comm. Pure Appl. Math. 14 (1961) p. 1
Goldenveizer, A. L.: Derivation of an approximate theory of bending of a plate by the method of asymptotic integration of the equations of the theory of elasticity. Appl. Math. Mech. English translation of Prikl. Mat. Mech. 26 (1968) p. 1000
Lure, A. I.: Three dimensional problems in the theory of elasticity. New York, London, Sydney, Toronto 1964
Poniatovskii, V. V.: Theory for plates of medium thickness. Prikl. Mat. Mekh. 26 (1962) p. 335
Srinivas, S., Rao, A. K., Joga Rao, C. V.: Flexure of simply supported thick homogeneous and laminated rectangular plates. Z. Angew. Math. Mech. 49 (1969) p. 449
Vlasov, V. Z.: Method of initial functions in problems of theory of thick plates and shells. Proc. 9th Int. Cong. Appl. Mech., Brussels, 1957, P. 321
Timoshenko, S., Krieger, S. W.: Theory of plates and shells. New York, 2nd ed., 1959, p. 165
Goodier, J. N.: The effect of transverse shear deformation on the bending of elastic plates. J. Appl. Mech. 13 (1946) P. 251
Langhaar, H. L.: Energy methods in applied mechanics. New York, London, Sydney, Toronto 1964
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Iyengar, K.T.S.R., Chandrashekhara, K. & Sebastian, V.K. On the analysis of thick rectangular plates. Ing. arch 43, 317–330 (1974). https://doi.org/10.1007/BF00537220
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00537220