Abstract
A novel indication model for potentiometric titrations has been presented, which is thought to be widely applicable. It is based on adsorption polarisation of indicator electrodes observable at very low concentration of measured ions. This concentration range depends on the surface quality of the indicator electrode.
Combining two electrodes of the same kind, one of them with defective surface, a potential peak suitable for endpoint indication appears when passing through the concentration range in question. At all other concentrations the potential difference remains constant. The method has been examplified by the system Ag+/I−.
Zusammenfassung
Es wird ein neuartiges Indizierungsmodell für potentiometrische Titrationen vorgestellt, das voraussichtlich allgemein anwendbar sein wird.
Grundlage ist die Adsorptionspolarisation, die man an Indicatorelektroden bei sehr kleiner Meßionenkonzentration feststellen kann. Diese Konzentrationsgrenze ist abhängig von der Oberflächenbeschaffenheit der betreffenden Elektrode. Kombiniert man eine oberflächengestörte mit einer ungestörten, sonst aber gleichartigen Elektrode, so beobachtet man beim Durchlaufen des betreffenden Konzentrationsbereichs Potentialänderungen, die sich zur Endpunktsindikation eignen, während in allen anderen Konzentrationsbereichen die Potentialdifferenz konstant ist.
Das Verfahren wird am System Ag+/J− näher erläutert.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Wir danken dem Verband der Chemischen Industrie, Fonds der Chemie, für finanzielle Förderung.
Rights and permissions
About this article
Cite this article
Schumacher, E., Umland, F. Adsorptionspolarisierte Elektroden zur Endpunktsindikation bei der potentiometrischen Titration. Z. Anal. Chem. 272, 257–261 (1974). https://doi.org/10.1007/BF00431337
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00431337