Abstract
The coefficient of friction of polycrystalline YBa2Cu3O7 − x(YBCO) on YBCO and YBCO on Ag was measured versus temperature and humidity in a ball-on-flat linear reciprocating experiment. The coefficient of friction as a function of strokes has initial and steady state values. In laboratory air, the average coefficients of friction of the YBCO-YBCO couple in the steady-state show a maximum of 0.90 at 100°C, while those for YBCO-Ag show a minimum of 0.26 at 400°C. The coefficient of friction of the YBCO-YBCO couple at 100 and 200°C exhibits a transition as the humidity increases. This transition is associated with cylindrical wear debris.
Similar content being viewed by others
References
R. F. COOK, T. R. DINGER and D. R. CLARKE, Appl. Phys. Lett. 51 (1987) 454.
H. C. LING and M. F. YAN, J. Appl. Phys. 64 (1988) 1307.
A. S. RAYNES, S. W. FREIMAN, F. W. GAYLE and D. L. KAISER, ibid. 70 (1991) 5254.
P. J. BLAU, C. E. DEVORE, D. F. WILSON and J. R. KEISER, Technical Report ORNL/TM-11053 (Oak Ridge National Laboratory, Oak Ridge, Tennessee, 1989).
B. I. VERKIN, L. S. PALATNIK and E. L. OSTROVSKAYA, Fizika Nizkikh Temperator 14 (1988) 553.
E. ZANORIA and S. Danyluk, unpublished results (1992).
M. B. PETERSON and S. F. MURRAY, Met. Eng. Quart. ASM 7 (1967) 22.
P. BOCH, F. PLATON and G. KAPELSKI, J. Euro. Ceram. Soc. 5 (1989) 223.
M. F. YAN, R. L. BARNS, H. M. O'BRYAN, P. K. GALLAGHER, R. C. SHERWOOD and S. JIN, Appl. Phys. Lett. 51 (1987) 532.
S. DANYLUK, D. S. PARK and M. MCNALLAN, J. Amer. Ceram. Soc. 75(11) (1992) 3033–39.
T. E. FISCHER and H. TOMIZAWA, Wear 105 (1985) 29.
C. S. YUST, J. T. LEITNAKER and C. E. DEVORE, ibid. 122 (1988) 151.
X. DONG, S. JAHANMIR and S. M. HSU, J. Amer. Ceram. Soc. 74 (1991) 1036.
D. SCOTT, Wear 34 (1975) 15.
D. SCOTT and G. H. MILLS, ibid. 24 (1973) 235.
Idem, Nature 241 (1973) 115.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Fang, Y., Danyluk, S. Coefficients of friction of YBCO-YBCO and YBCO-Ag ball-on-flat couples. JOURNAL OF MATERIALS SCIENCE 28, 5658–5662 (1993). https://doi.org/10.1007/BF00367843
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00367843