Abstract
The kinetic grain growth has been determined in a Cu-Zn-Al-Mn alloy by the calculation of different grain-size parameters (perimeter, minimum and maximum diameter) and the ratio of the grain-boundary area per unit volume from measurements obtained at different temperatures and heat-treatment times. The growth order and activation energy have been evaluated.
Similar content being viewed by others
References
J. M. YANG, C. S. ZHANG, L. C. ZHAO and T. C. LEI, Scripta Metall. 21 (1987) 259.
L. C. ZHAO, J. M. YANG, C. S. ZHANG, T. C. LEI, H. GU and Y. S. HE, ibid. 20 (1986) 29.
F. J. GIL and J. M. GUILEMANY, J. Mater. Sci. Lett. 10 (1990) 145.
P. A. BECK, J. C. KREMER, L. J. DENER and M. L. HOLZWORTH, Trans. Met. Soc. AIME 175 (1948) 372.
P. A. BECK, J. Appl. Phys 19 (1948) 507.
P. A. BECK, J. TOWERS and W. O. MANLEY, Trans. Met Soc. AIME 175 (1951) 634
F. J. GIL, Doctoral Thesis, University of Barcelona (1989).
M. HILLERT, Acta Metall. 13 (1965) 227.
A. G. GUY and J. J. HREN, “Elements of Physical Metallurgy” 3rd Edn (Addison Wesley, Reading, MA, 1974) pp. 446–50.
R. L. FULLMAN, ASM Seminar Metal Interfaces 1 (1952) 179.
J. C. FISHER and R. L. FULLMAN, in “Progress in Metal Physics”, Vol. 3, edited by B. Chalmers (1952) p. 97.
J. S. SMART, Trans. AIME Inst. Metals. Div. Techn. Rus. (1943) 1567.
J. D. VERHOEVEN, “Fundamentals of Physical Metallurgy” (Wiley, New York, 1987).
J. M. GUILEMANY and F. J. GIL, J. Mater. Sci. 26 (1991) 4626.
E. E. UNDERWOOD, “Quantitative Stereology” (Addison Wesley, Reading, MA, 1980).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Gil, F.J., Guilemany, J.M. & Sanchiz, I. Grain growth in Cu-Zn-Al-Mn shape-memory alloy. Journal of Materials Science 28, 1542–1544 (1993). https://doi.org/10.1007/BF00363346
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF00363346